Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green PCB riser board with PCIe x16 slot, USB 3.0 cable and SATA power connector

EN-Labs

EN-Labs PCIe 1x to 16x Riser Card 60cm USB 3.0 SATA Power

SKU CH-NJFY-HDD8V

Extends a single PCIe lane to a full-size slot with a 60 cm USB 3.0 cable and SATA power for stable GPU operation

  • Features3 High Quality Solid Capacitors, Voltage Regulation, and Ove
  • Solid capacitors with voltage regulation and overcurrent protection safeguard the GPU
  • 60cm USB 3.0 cable gives flexible placement for PCI-E devices
  • Molex 4-pin power draws from separate rails to reduce motherboard strain
  • Works with 1x, 4x, 8x, 16x motherboard slots
  • Set BIOS PCIe to GEN2 or GEN 1 if the graphics card is not identified

PCIe 1x to 16x Riser for GPU Mining

This EN-Labs riser card adapts a PCIe 1x motherboard slot to accept a full-size 16x graphics card. It is intended for builders assembling open-air or rack-mounted mining rigs who need to space multiple GPUs away from the board.

60cm USB 3.0 cable sets the reach

The 60cm USB 3.0 cable carries the differential signals between the 1x slot adapter and the 16x GPU connector. Its length determines how far the graphics card can sit from the motherboard in a mining frame.

SATA-to-4Pin power cable moves load off the board

A SATA to 4Pin Molex cable is included so the riser draws auxiliary power from the PSU instead of the motherboard slot. Three solid capacitors on the card provide voltage regulation and overcurrent protection for the GPU.

Pluspunten

  • Solid capacitors with voltage regulation and overcurrent protection safeguard the GPU
  • 60cm USB 3.0 cable gives flexible placement for PCI-E devices
  • Molex 4-pin power draws from separate rails to reduce motherboard strain
  • Works with 1x, 4x, 8x, 16x motherboard slots
  • Set BIOS PCIe to GEN2 or GEN 1 if the graphics card is not identified

Specificaties

Features3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Molex 4 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 008S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining

Vragen over dit artikel

Does the 1x to 16x riser run a graphics card at full 16x speed?

The riser connects a 16x card to a 1x slot, so the link operates at 1x bandwidth; the card will work but not at full 16x throughput

What PCIe generation does the USB 3.0 cable support and what BIOS setting may be needed?

The cable is rated for USB 3.0; if the graphics card is not recognised, set the motherboard PCIe slot to Gen 2 or Gen 1 in BIOS

What power connectors must the PSU provide for this riser kit?

The kit includes a SATA to 4‑pin Molex cable, so the power supply needs a free SATA power lead to feed the riser board

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.