EZ Dupe NVMe Cyclone 600 1-to-4 Duplicator
- NVMe Duplicator
- Black
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
EZ Dupe, Inc.
Standalone duplicator copies up to nine M.2 NVMe drives at 300MB/s with five copy modes and seven erase modes
Target 1 to 9
Speed 300MB/Sec (18GB/Min)
Option M.2 NVME
The EZ Dupe NVMe Cyclone 300 is a standalone duplicator that copies one M.2 NVMe source to nine targets at up to 300 MB/s. It uses an Athena controller with 128 MB buffer memory and a 16 x 2 LCD for local operation without a host PC. The unit accepts B-Key, M-Key and B+M-Key modules and handles both MBR and GPT partitioning schemes.
The duplicator runs from a universal AC supply rated 115-230 V at 50/60 Hz and uses slot-loading bays for drive insertion. Five copy modes are available, including Whole Media, System and Files, All Partitions, Percentage and Non-zero copy. Real-time copy-and-compare technology verifies each section as it is written to maintain data integrity during high-volume runs.
This unit replaces the practice of cloning drives one by one through a workstation, cutting hands-on time for IT deployment, forensic imaging or OEM provisioning. Seven erase modes from Quick Erase to DoD 7-Pass and Secure Erase cover sanitisation requirements. Daisy-chain support lets up to 255 units work together when nine targets are not enough, and event logs with timestamps can be downloaded for audit trails.
| Brand | EZ Dupe |
|---|---|
| Type | NVMe Duplicator |
| Model | NVMe Cyclone 300 |
| Panel Color | Black |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | M.2 NVME |
| Target | 1 to 9 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | M.2 NVMe |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Standalone |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Connect the AC power cable to a 115-230 V, 50/60 Hz supply, insert the source M.2 NVMe drive into the source slot and up to 9 target drives into the target slots, then power on using the front switch; the step often missed is confirming each target drive clicks fully into its M.2 connector before starting a copy job.
The unit has no user-serviceable parts; keep the ventilation slots clear of dust and verify the 16 x 2 LCD remains legible; if the Athena Controller or power supply fails, the entire duplicator must be serviced under the 1-year manufacturer part and labor warranty.
The 300 MB/s data transfer rate and 128 MB buffer memory set the throughput ceiling; during long runs the duplicator will pace copies to this speed, so total job time scales linearly with the number of target drives up to 9.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?