Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black standalone NVMe duplicator with 16x2 LCD and nine M.2 slots

EZ Dupe, Inc.

EZ Dupe, Inc. NVMe Cyclone 300 Duplicator 1 to 9 300MB/s

SKU CH-2M81-FGQQ2

Standalone duplicator copies up to nine M.2 NVMe drives at 300MB/s with five copy modes and seven erase modes

  • TypeNVMe Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorM.2 NVME
  • Target1 to 9

Target 1 to 9

Speed 300MB/Sec (18GB/Min)

Option M.2 NVME

  • Copies up to 9 drives simultaneously at 300 MB/s
  • Standalone operation with 16×2 LCD and 128 MB buffer
  • Five copy modes including Whole Media and Non-zero copy
  • Seven erase modes from Quick Erase to DoD 7-Pass
  • Daisy-chain up to 255 units for large-scale duplication

Standalone NVMe duplicator for up to 9 targets

The EZ Dupe NVMe Cyclone 300 is a standalone duplicator that copies one M.2 NVMe source to nine targets at up to 300 MB/s. It uses an Athena controller with 128 MB buffer memory and a 16 x 2 LCD for local operation without a host PC. The unit accepts B-Key, M-Key and B+M-Key modules and handles both MBR and GPT partitioning schemes.

AC power 115-230 V with slot-loading bays

The duplicator runs from a universal AC supply rated 115-230 V at 50/60 Hz and uses slot-loading bays for drive insertion. Five copy modes are available, including Whole Media, System and Files, All Partitions, Percentage and Non-zero copy. Real-time copy-and-compare technology verifies each section as it is written to maintain data integrity during high-volume runs.

Replaces manual PC-based cloning for batch

This unit replaces the practice of cloning drives one by one through a workstation, cutting hands-on time for IT deployment, forensic imaging or OEM provisioning. Seven erase modes from Quick Erase to DoD 7-Pass and Secure Erase cover sanitisation requirements. Daisy-chain support lets up to 255 units work together when nine targets are not enough, and event logs with timestamps can be downloaded for audit trails.

Helstu kostir

  • Copies up to 9 drives simultaneously at 300 MB/s
  • Standalone operation with 16×2 LCD and 128 MB buffer
  • Five copy modes including Whole Media and Non-zero copy
  • Seven erase modes from Quick Erase to DoD 7-Pass
  • Daisy-chain up to 255 units for large-scale duplication

Tæknilýsing

BrandEZ Dupe
TypeNVMe Duplicator
ModelNVMe Cyclone 300
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorM.2 NVME
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaM.2 NVMe
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesStandalone
Power SupplyAC: 115-230 V, 50/60 Hz

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the NVMe Cyclone 300 duplicator and what step is commonly missed?

Connect the AC power cable to a 115-230 V, 50/60 Hz supply, insert the source M.2 NVMe drive into the source slot and up to 9 target drives into the target slots, then power on using the front switch; the step often missed is confirming each target drive clicks fully into its M.2 connector before starting a copy job.

What maintenance or replacement will the NVMe Cyclone 300 need over time?

The unit has no user-serviceable parts; keep the ventilation slots clear of dust and verify the 16 x 2 LCD remains legible; if the Athena Controller or power supply fails, the entire duplicator must be serviced under the 1-year manufacturer part and labor warranty.

What limit appears first during sustained high-volume copying on the NVMe Cyclone 300?

The 300 MB/s data transfer rate and 128 MB buffer memory set the throughput ceiling; during long runs the duplicator will pace copies to this speed, so total job time scales linearly with the number of target drives up to 9.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.