EZ Dupe, Inc. NVMe Cyclone Pro 300 1-to-4 M.2 NVMe Duplicator
- M.2 NVME Duplicator
- Black
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
EZ Dupe, Inc.
Standalone duplicator copies up to nine M.2 NVMe or SATA drives at 300 MB/s with five copy modes and eight erase modes
Target 1 to 9
Speed 300MB/Sec (18GB/Min)
Option M.2 NVME & SATA HDD
The EZ Dupe NVMe Cyclone Pro 300 is a standalone duplicator that copies one M.2 NVMe or SATA source to up to 9 targets at 300MB/s. It also handles 2.5 and 3.5 inch SATA drives and runs erase routines without a host PC.
Verify that each target uses an M-key, B-key or B+M-key M.2 module or a standard SATA SSD or hard drive. The unit needs an AC supply between 115 and 230 V at 50 or 60 Hz and presents a slot-load mechanism for the M.2 devices.
The duplicator operates from a 115 to 230 V mains input with a 128 MB buffer and an Athena controller. A 16 x 2 LCD and indication lights show job status while the standalone design keeps the system running without adding load to a workstation.
| Brand | EZ Dupe |
|---|---|
| Type | M.2 NVME Duplicator |
| Model | NVME Cyclone Pro 300 |
| Part Number | DM-HE3-5M09PP |
| Panel Color | Black |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | M.2 NVME / Hard Drive SATA |
| Target | 1 to 9 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | M.2 NVME / SATA Hard Drive Disk / Solid State Drive |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | SATA HDD connection |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
The duplicator ships with the standalone unit, a 16 x 2 LCD panel, and an AC power supply rated 115-230 V at 50/60 Hz. You provide the source and up to nine target M.2 NVMe or SATA SSDs, plus any 2.5" or 3.5" SATA hard drives you wish to copy or erase.
The NVMe Cyclone Pro 300 duplicates at 300 MB/s across one source and nine targets. The 600 model runs at 600 MB/s. Pick the 300 if your drives and workflow do not need the higher throughput.
It is the maximum sustained copy speed the Athena Controller can deliver to each of the nine target slots during a duplication job, assuming the installed M.2 NVMe or SATA drives can accept data at that rate.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?