EZ Dupe, Inc. NVMe Cyclone Pro 300 1-to-4 M.2 NVMe Duplicator
- M.2 NVME Duplicator
- Black
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
EZ Dupe, Inc.
Standalone duplicator copies up to nine M.2 NVMe or SATA drives at 300 MB/s with five copy modes and eight erase modes
Target 1 to 9
Speed 300MB/Sec (18GB/Min)
Option M.2 NVME & SATA HDD
The EZ Dupe NVMe Cyclone Pro 300 is a standalone duplicator that copies one M.2 NVMe or SATA source to up to 9 targets at 300MB/s. It also handles 2.5 and 3.5 inch SATA drives and runs erase routines without a host PC.
Verify that each target uses an M-key, B-key or B+M-key M.2 module or a standard SATA SSD or hard drive. The unit needs an AC supply between 115 and 230 V at 50 or 60 Hz and presents a slot-load mechanism for the M.2 devices.
The duplicator operates from a 115 to 230 V mains input with a 128 MB buffer and an Athena controller. A 16 x 2 LCD and indication lights show job status while the standalone design keeps the system running without adding load to a workstation.
| Brand | EZ Dupe |
|---|---|
| Type | M.2 NVME Duplicator |
| Model | NVME Cyclone Pro 300 |
| Part Number | DM-HE3-5M09PP |
| Panel Color | Black |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | M.2 NVME / Hard Drive SATA |
| Target | 1 to 9 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | M.2 NVME / SATA Hard Drive Disk / Solid State Drive |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | SATA HDD connection |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The duplicator ships with the standalone unit, a 16 x 2 LCD panel, and an AC power supply rated 115-230 V at 50/60 Hz. You provide the source and up to nine target M.2 NVMe or SATA SSDs, plus any 2.5" or 3.5" SATA hard drives you wish to copy or erase.
The NVMe Cyclone Pro 300 duplicates at 300 MB/s across one source and nine targets. The 600 model runs at 600 MB/s. Pick the 300 if your drives and workflow do not need the higher throughput.
It is the maximum sustained copy speed the Athena Controller can deliver to each of the nine target slots during a duplication job, assuming the installed M.2 NVMe or SATA drives can accept data at that rate.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?