Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black standalone duplicator with 16x2 LCD, nine M.2 NVMe slots and SATA ports for 2.5 and 3.5 drives

EZ Dupe, Inc.

EZ Dupe NVMe Cyclone Pro 300 Duplicator 1-to-9 300MB/s

SKU CH-S9T5-EFCH0

Standalone duplicator copies up to nine M.2 NVMe or SATA drives at 300 MB/s with five copy modes and eight erase modes

  • TypeM.2 NVME Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorM.2 NVME / Hard Drive SATA
  • Target1 to 9

Target 1 to 9

Speed 300MB/Sec (18GB/Min)

Option M.2 NVME & SATA HDD

  • Standalone operation with 16×2 LCD requires no host PC
  • Copies up to 9 targets at 300 MB/s for M.2 NVMe and SATA drives
  • Five copy modes include whole media, system and files, all partitions, percentage and non-zero
  • Eight erase modes cover Quick, Full, DoD 3-pass, DoD 7-pass, Secure, Enhance, HPA and DCO
  • Daisy-chains up to 255 units for large-scale duplication projects

What the duplicator does

The EZ Dupe NVMe Cyclone Pro 300 is a standalone duplicator that copies one M.2 NVMe or SATA source to up to 9 targets at 300MB/s. It also handles 2.5 and 3.5 inch SATA drives and runs erase routines without a host PC.

Check your drives and power

Verify that each target uses an M-key, B-key or B+M-key M.2 module or a standard SATA SSD or hard drive. The unit needs an AC supply between 115 and 230 V at 50 or 60 Hz and presents a slot-load mechanism for the M.2 devices.

Thermals noise and power

The duplicator operates from a 115 to 230 V mains input with a 128 MB buffer and an Athena controller. A 16 x 2 LCD and indication lights show job status while the standalone design keeps the system running without adding load to a workstation.

Puncte forte

  • Standalone operation with 16×2 LCD requires no host PC
  • Copies up to 9 targets at 300 MB/s for M.2 NVMe and SATA drives
  • Five copy modes include whole media, system and files, all partitions, percentage and non-zero
  • Eight erase modes cover Quick, Full, DoD 3-pass, DoD 7-pass, Secure, Enhance, HPA and DCO
  • Daisy-chains up to 255 units for large-scale duplication projects

Specificații

BrandEZ Dupe
TypeM.2 NVME Duplicator
ModelNVME Cyclone Pro 300
Part NumberDM-HE3-5M09PP
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorM.2 NVME / Hard Drive SATA
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaM.2 NVME / SATA Hard Drive Disk / Solid State Drive
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesSATA HDD connection
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What comes with the NVMe Cyclone Pro 300 and which drives must I supply myself?

The duplicator ships with the standalone unit, a 16 x 2 LCD panel, and an AC power supply rated 115-230 V at 50/60 Hz. You provide the source and up to nine target M.2 NVMe or SATA SSDs, plus any 2.5" or 3.5" SATA hard drives you wish to copy or erase.

Which version of the Cyclone Pro should I choose for my workload?

The NVMe Cyclone Pro 300 duplicates at 300 MB/s across one source and nine targets. The 600 model runs at 600 MB/s. Pick the 300 if your drives and workflow do not need the higher throughput.

What does the 300 MB/s headline figure mean when the machine is running?

It is the maximum sustained copy speed the Athena Controller can deliver to each of the nine target slots during a duplication job, assuming the installed M.2 NVMe or SATA drives can accept data at that rate.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.