Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Two black aluminium heatspreaders with exposed RGB light bars

G.SKILL

G.SKILL F4-3000C16D-16GTZR 16GB (2 x 8GB) DDR4 3000 CL16 desktop RAM

SKU CH-9B5M-ST456 MPN F4-3000C16D-16GTZR

16 GB dual-channel DDR4 kit with CL16 timing, 3000 MT/s speed and customizable RGB lighting on aluminum heatspreaders

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3000 (PC4 24000)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

Speed DDR4 3000 (PC4 24000)

CAS Latency CL16

  • Dual-channel 16 GB kit enables smooth multitasking
  • 3000 MT/s DDR4 speed with CL16 latency delivers responsive performance
  • 35 V operation keeps power draw low
  • Intel XMP 2.0 profile allows one-click overclocking
  • Full-length RGB light bar adds customisable illumination

G.SKILL TridentZ RGB DDR4 3000 CL16 Kit

This 16GB dual-channel kit delivers DDR4 3000 speed with CL16 16-18-18-38 timings at 1.35V. The exposed RGB light bar and aluminum heatspreader combine visual flair with efficient thermal management. Intel XMP 2.0 support enables one-click configuration on compatible platforms.

Ideal for RGB-focused builds on listed Intel

Builders who want matched 8GB modules with synchronized lighting and guaranteed XMP stability will appreciate the factory-tuned kit. Users needing ECC, registered DIMMs, or speeds beyond the rated 3000 MT/s should select a different specification.

DDR4 3000 CL16 at 1.35V with Intel XMP 2.0

The rated frequency, latency, and voltage determine whether the kit runs at its advertised profile without manual tuning. Confirm the motherboard QVL supports this exact speed and timing combination before purchase.

Акценти

  • Dual-channel 16 GB kit enables smooth multitasking
  • 3000 MT/s DDR4 speed with CL16 latency delivers responsive performance
  • 35 V operation keeps power draw low
  • Intel XMP 2.0 profile allows one-click overclocking
  • Full-length RGB light bar adds customisable illumination

Спецификации

BrandG.SKILL
SeriesTridentZ RGB Series
ModelF4-3000C16D-16GTZR
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3000 (PC4 24000)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesSleek aluminum heatspreader design.
Customizable RGB lighting support.
Intel XMP 2.0 Support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock speed and system stability will
Recommend UseAMD X570
Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270
LED ColorRGB
Тегло на пратката0.23 kg
Размери на опаковката160 × 140 × 18 mm

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Will the 288-pin DDR4 modules with aluminum heatspreaders fit under my CPU cooler?

The modules use a standard 288-pin DDR4 form factor with an aluminum heatspreader; verify your cooler's clearance spec against the module height before installing.

How do I enable the rated DDR4 3000 CL16 16-18-18-38 timings at 1.35V, and what step is often missed?

Enable the Intel XMP 2.0 profile in BIOS after seating both modules in the correct dual-channel slots; the common miss is leaving the board on auto defaults.

When should I clean the exposed RGB light bar and heatspreader fins, and how?

Use compressed air to clear dust from the light bar and fin array every few months; avoid liquids on the exposed LEDs and PCB contacts.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.