Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Silver 3.5-inch bare hard drive with exposed circuit board

HGST

HGST HDS721616PLAT80 160GB 7200 RPM 8MB IDE 3.5" internal hard drive

SKU CH-CZZ4-GA39G MPN HDS721616PLAT80

A 160 GB 7200 RPM IDE desktop drive with 8 MB cache and 8.5 ms seek time, featuring thermal monitoring for reliability

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity160GB
  • RPM7200 RPM
  • Cache8MB
  • Average Seek Time8.5ms
  • Fast data access with 7200 RPM spindle speed
  • Smooth multitasking supported by 8MB cache buffer
  • Wide compatibility via IDE Ultra ATA133 interface
  • Reliable operation from thermal monitoring and fly height control
  • Standard 3.5 inch form factor fits desktop bays

Deskstar 7K160 160 GB IDE drive

The HGST Deskstar 7K160 is a 3.5-inch desktop hard drive with 160 GB capacity, 7200 RPM spindle speed and an 8 MB cache. It connects through an IDE Ultra ATA133 / ATA-7 interface and is supplied as a bare drive in new condition. Average seek time is 8.5 ms and the unit includes thermal monitoring with fly-height control for reliability.

Suits legacy IDE systems only

This drive fits older desktops or industrial equipment that still use a parallel ATA interface and need a modest 160 GB volume. Builders working with modern motherboards that lack an IDE connector, or anyone requiring higher capacity or faster transfer rates, should consider a different storage solution.

Interface decides compatibility

The sole specification that determines whether this is the correct part is the IDE Ultra ATA133 / ATA-7 interface; the host must provide a matching 40-pin connector and support the ATA-7 command set for the drive to function.

Акценти

  • Fast data access with 7200 RPM spindle speed
  • Smooth multitasking supported by 8MB cache buffer
  • Wide compatibility via IDE Ultra ATA133 interface
  • Reliable operation from thermal monitoring and fly height control
  • Standard 3.5 inch form factor fits desktop bays

Спецификации

BrandHitachi GST
SeriesDeskstar 7K160
ModelHDS721616PLAT80 (0Y30002)
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity160GB
RPM7200 RPM
Cache8MB
Average Seek Time8.5ms
FeaturesThermal Monitoring and Fly Height Control for high reliability
SMART Command Transport optimized response times
Form Factor3.5"
Тегло на пратката0.68 kg
Размери на опаковката203 × 152 × 51 mm

Въпроси за този артикул

Will my motherboard need an IDE Ultra ATA133 connector to install this 160GB Deskstar 7K160?

Yes, the drive uses an IDE Ultra ATA133 / ATA-7 interface so the board must provide a matching 40-pin IDE header.

Can I keep an older IDE drive on the same cable while adding this 7200 RPM model?

Both devices will share one IDE channel; set the Deskstar as master and the older drive as slave, or use cable select, and the system will recognise each 160GB and legacy volume.

How do I verify the 8MB cache and 8.5ms seek time are active after fitting the bare drive?

Run the manufacturer’s diagnostic utility or check SMART data — it will report the cache size, rotational speed, and seek performance for the HDS721616PLAT80.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.