Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Silver 3.5-inch bare hard drive with exposed circuit board

HGST

HGST HDS721616PLAT80 160GB 7200 RPM 8MB IDE 3.5" internal hard drive

SKU CH-CZZ4-GA39G MPN HDS721616PLAT80

A 160 GB 7200 RPM IDE desktop drive with 8 MB cache and 8.5 ms seek time, featuring thermal monitoring for reliability

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity160GB
  • RPM7200 RPM
  • Cache8MB
  • Average Seek Time8.5ms
  • Fast data access with 7200 RPM spindle speed
  • Smooth multitasking supported by 8MB cache buffer
  • Wide compatibility via IDE Ultra ATA133 interface
  • Reliable operation from thermal monitoring and fly height control
  • Standard 3.5 inch form factor fits desktop bays

Deskstar 7K160 160 GB IDE drive

The HGST Deskstar 7K160 is a 3.5-inch desktop hard drive with 160 GB capacity, 7200 RPM spindle speed and an 8 MB cache. It connects through an IDE Ultra ATA133 / ATA-7 interface and is supplied as a bare drive in new condition. Average seek time is 8.5 ms and the unit includes thermal monitoring with fly-height control for reliability.

Suits legacy IDE systems only

This drive fits older desktops or industrial equipment that still use a parallel ATA interface and need a modest 160 GB volume. Builders working with modern motherboards that lack an IDE connector, or anyone requiring higher capacity or faster transfer rates, should consider a different storage solution.

Interface decides compatibility

The sole specification that determines whether this is the correct part is the IDE Ultra ATA133 / ATA-7 interface; the host must provide a matching 40-pin connector and support the ATA-7 command set for the drive to function.

I korthet

  • Fast data access with 7200 RPM spindle speed
  • Smooth multitasking supported by 8MB cache buffer
  • Wide compatibility via IDE Ultra ATA133 interface
  • Reliable operation from thermal monitoring and fly height control
  • Standard 3.5 inch form factor fits desktop bays

Specifikationer

BrandHitachi GST
SeriesDeskstar 7K160
ModelHDS721616PLAT80 (0Y30002)
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity160GB
RPM7200 RPM
Cache8MB
Average Seek Time8.5ms
FeaturesThermal Monitoring and Fly Height Control for high reliability
SMART Command Transport optimized response times
Form Factor3.5"
Fraktvikt0.68 kg
Paketstorlek203 × 152 × 51 mm

Frågor om den här produkten

Will my motherboard need an IDE Ultra ATA133 connector to install this 160GB Deskstar 7K160?

Yes, the drive uses an IDE Ultra ATA133 / ATA-7 interface so the board must provide a matching 40-pin IDE header.

Can I keep an older IDE drive on the same cable while adding this 7200 RPM model?

Both devices will share one IDE channel; set the Deskstar as master and the older drive as slave, or use cable select, and the system will recognise each 160GB and legacy volume.

How do I verify the 8MB cache and 8.5ms seek time are active after fitting the bare drive?

Run the manufacturer’s diagnostic utility or check SMART data — it will report the cache size, rotational speed, and seek performance for the HDS721616PLAT80.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.