JONSBO ZB-120B 120mm 28mm ARGB case fan 700-2400rpm
- Case Fan
- Case
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
JONSBO
A 140 mm case fan spins at 700-1800 RPM and delivers 18.75-47.71 CFM airflow at 16.4-30.7 dB(A) with four-sided infinity-mirror ARGB lighting
The JONSBO ZA-120WR is a 140 mm case fan that combines PWM speed control with addressable RGB lighting. Its 4-sided infinity-mirror design creates a layered visual effect while the aluminium nameplate adds a refined finish. A joint structure allows the fan to be clipped together with other units in the series for simplified cable routing.
The fan suits systems that use a motherboard with a 5 V 3-pin ARGB header and a 4-pin PWM header for automatic speed regulation. It is not intended for builds that lack ARGB support or for radiators and dense heatsinks that demand higher static pressure than the 0.33–1.66 mmH₂O range provides.
This single figure determines whether the fan can meet the cooling target of a given chassis. At the lower end it runs near-silent at 16.4 dB(A), while the top speed delivers 47.71 CFM for increased throughput when thermal loads rise.
| Brand | JONSBO |
|---|---|
| Series | ZA SERIES |
| Model | ZA-120WR |
| Fan Size | 140mm |
| LED | ARGB |
| Type | Case Fan |
| RPM | 700-1800 RPM |
| Air Flow | 18.75-47.71 CFM |
| Noise Level | 16.4-30.7 dB(A) |
| Power Connector | PWM 4PIN ARGB 3PIN |
| Color | Black |
| Compatibility | Case |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Fan Thickness | 28mm |
| Air Pressure | 0.33-1.66 mmH2O |
| Features | JONSBO ZA-120 T28MM ARGB Infinity Mirror Series Case Fan- 4-Sides Thousand- layer Mirror Illusion Easy Installation of the Joint Structure One Line Connection to Motherboard Aluminum CD Pattern Nameplate Addressable RGB sync- Insert 3PIN ARGB pins directly into the motherboard, synchronizing Over 16 million color effects Quiet/Low Noise PWN fan Specification: Model No. ZA-120WR(Reversed) COLOR: WHITE Product Dimensions:4.72"L x 4.72"W x 1.1"H Brand:JONSBO Power Connector Type:4-Pin ARGB 3-Pin Voltage: DC12 Volts LED 5V Wattage:1.2 watts LED 3.55W Cooling Method: Air Compatible Device |
| Dimensions | 4.72"L x 4.72"W x 1.1"H |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
The ZA-120WR is the 140 mm model; a 120 mm variant exists but its airflow and noise figures differ from the 18.75-47.71 CFM and 16.4-30.7 dB(A) shown here.
At 1800 RPM the fan moves up to 47.71 CFM with 1.66 mmH2O pressure, suitable for moderate intake or exhaust on radiators and mesh panels.
Yes — the 4-pin PWM header controls speed from 700-1800 RPM, while the 3-pin 5 V ARGB header syncs addressable lighting with motherboard software.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?