Jungle Leopard Prism6 PRO ARGB 120mm Case Fan White 1600RPM
- 1 Fan
- Case Fan
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Jungle Leopard
Three 120 mm reverse-blade ARGB fans with three-sided infinite-mirror lighting, hydraulic bearings and 800-1850 RPM PWM control for adjustable airflow up to 58.36 CFM at 29 dBA
Color White Reverse-3Pack
The Jungle Leopard Prism6 MAX is a 120 mm ARGB case fan sold as a white three-pack. Its reverse-blade design lets builders pull or push air in the opposite direction of a standard fan, giving more layout freedom inside the chassis. Hydraulic bearings and double-sided silicone pads keep vibration low while the fan spins between 800 and 1850 RPM.
The fan draws power through a 4-pin PWM connector but the addressable lighting needs a motherboard 5 V 3-pin header. Without that header the LEDs cannot be synchronised and a separate controller box must be added. The magnetic mounting feet simplify installation but do not replace the electrical requirement.
At 1850 RPM the fan delivers 58.36 CFM with 2.07 mmH₂O of static pressure at 29 dBA. That pressure figure decides whether the fan can overcome restrictive radiators or dense mesh panels. Builders chasing higher static pressure for thick radiators will need a different model.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 MAX |
| Model | JL Prism6 MAX BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1850RPM |
| Air Flow | 58.36CFM |
| Air Pressure | 2.07mmH20 |
| Noise Level | =29DBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Pick the white reverse-blade pack when you want intake fans that pull air through a radiator or restrictive front panel; choose a forward-blade version for exhaust positions, and match black or white to your build theme.
At full speed the three fans move up to 58.36 CFM each, giving strong airflow through mesh panels or radiators while the hydraulic bearing keeps noise near 29 dBA.
The 5 V 3-pin header lets the board synchronise ARGB effects; if your motherboard lacks that header you will need a separate controller box to manage the lighting.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?