Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Three white 120mm reverse-blade fans with infinite-mirror ARGB rings and hydraulic bearings

Jungle Leopard

Jungle Leopard Prism6 MAX 120mm Reverse Blade ARGB Case Fan White 3-Pack

SKU CH-B7Y4-WWT7R

Three 120 mm reverse-blade ARGB fans with three-sided infinite-mirror lighting, hydraulic bearings and 800-1850 RPM PWM control for adjustable airflow up to 58.36 CFM at 29 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Reverse-3Pack

  • Three-sided infinite-mirror ARGB creates depth with 0.5 mm layered optics
  • Reverse-blade design lets you pair intake and exhaust for balanced airflow
  • Hydraulic bearing runs at 1850 RPM while keeping noise to 29 dBA
  • 36 CFM airflow and 2.07 mmH₂O pressure clear heat from tight builds
  • Silicone shock pads on both sides cut vibration transferred to the chassis

Reverse-blade airflow control

The Jungle Leopard Prism6 MAX is a 120 mm ARGB case fan sold as a white three-pack. Its reverse-blade design lets builders pull or push air in the opposite direction of a standard fan, giving more layout freedom inside the chassis. Hydraulic bearings and double-sided silicone pads keep vibration low while the fan spins between 800 and 1850 RPM.

5 V 3-pin ARGB header required

The fan draws power through a 4-pin PWM connector but the addressable lighting needs a motherboard 5 V 3-pin header. Without that header the LEDs cannot be synchronised and a separate controller box must be added. The magnetic mounting feet simplify installation but do not replace the electrical requirement.

2.07 mmH₂O static pressure

At 1850 RPM the fan delivers 58.36 CFM with 2.07 mmH₂O of static pressure at 29 dBA. That pressure figure decides whether the fan can overcome restrictive radiators or dense mesh panels. Builders chasing higher static pressure for thick radiators will need a different model.

Najważniejsze cechy

  • Three-sided infinite-mirror ARGB creates depth with 0.5 mm layered optics
  • Reverse-blade design lets you pair intake and exhaust for balanced airflow
  • Hydraulic bearing runs at 1850 RPM while keeping noise to 29 dBA
  • 36 CFM airflow and 2.07 mmH₂O pressure clear heat from tight builds
  • Silicone shock pads on both sides cut vibration transferred to the chassis

Specyfikacja

BrandJungle Leopard
SeriesPrism6 MAX
ModelJL Prism6 MAX BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1850RPM
Air Flow58.36CFM
Air Pressure2.07mmH20
Noise Level=29DBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Should I choose the white reverse-blade 3-pack or one of the other colour and airflow versions?

Pick the white reverse-blade pack when you want intake fans that pull air through a radiator or restrictive front panel; choose a forward-blade version for exhaust positions, and match black or white to your build theme.

What does the 58.36 CFM airflow figure mean once the fans are installed in a case?

At full speed the three fans move up to 58.36 CFM each, giving strong airflow through mesh panels or radiators while the hydraulic bearing keeps noise near 29 dBA.

How does the 5 V 3-pin ARGB connector limit lighting control on my motherboard?

The 5 V 3-pin header lets the board synchronise ARGB effects; if your motherboard lacks that header you will need a separate controller box to manage the lighting.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.