Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Single black DDR5 RDIMM module with heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KF564R32RBE2-32 32GB DDR5 6400 CL32 ECC RDIMM server RAM

SKU CH-K3NZ-QV2MX MPN KF564R32RBE2-32

32GB DDR5 RDIMM with ECC, registered signal, CL32 latency and 6400 MT/s speed

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL32
  • Timing32-39-39
  • Voltage1.40V

Capacity 32GB

Speed DDR5 6400 (PC5 51200)

Rank 2Rx8

  • 32GB capacity supports heavy workloads with ample memory headroom
  • DDR5 6400 speed with CL32 latency delivers fast registered data access
  • ECC and registered design detects and corrects errors for data integrity
  • AMD EXPO 1.1 profile enables automatic overclocking to rated timings
  • 288-pin RDIMM form factor fits compatible server and workstation boards

32GB DDR5-6400 ECC RDIMM

This 32GB Kingston Fury Renegade Pro module is a registered DDR5 DIMM with ECC and a CL32 latency profile. It targets workstation and high-end desktop builders who need data-integrity features alongside overclockable speeds. The single 2Rx8 module uses AMD EXPO v1.1 for automatic configuration.

Registered DDR5 platform limits

Registered DDR5 DIMMs add a buffer that stabilises heavy memory loads but introduces one extra cycle of latency versus unbuffered modules. The 1.40V operating voltage and 6400 MT/s data rate demand a motherboard with a validated DDR5 RDIMM topology and EXPO support. Overclocking headroom depends on the platform memory controller and BIOS quality.

Upgrade from slower or non-ECC DDR5

This module replaces slower DDR5 RDIMMs or non-ECC UDIMMs when error correction and registered signalling become mandatory for workload stability. The jump is worth it when moving to a platform that requires RDIMMs for capacity scaling or when multi-bit ECC protection is needed for professional data integrity.

Акценти

  • 32GB capacity supports heavy workloads with ample memory headroom
  • DDR5 6400 speed with CL32 latency delivers fast registered data access
  • ECC and registered design detects and corrects errors for data integrity
  • AMD EXPO 1.1 profile enables automatic overclocking to rated timings
  • 288-pin RDIMM form factor fits compatible server and workstation boards

Спецификации

BrandKingston
SeriesFury Renegade Pro
ModelKF564R32RBE2-32
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL32
Timing32-39-39
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Multi-channel KitSingle Channel
BIOS/Performance ProfileAMD EXPO
Heat SpreaderYes
FeaturesKingston FURY KF564R32RBE2-32 is a 4G x 80-bit (32GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 2Rx8, ECC memory module, based on twenty 2G x 8-bit FBGA components per module. The module supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.
Тегло на пратката0.05 kg
Размери на опаковката171 × 57 × 13 mm

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Should I pick the single 32 GB module or look for a multi-channel kit?

This is a single 32 GB module; if your platform benefits from dual-channel bandwidth, buy two identical sticks to populate paired slots.

What does 6400 MT/s actually deliver in a workstation?

The module runs at DDR5-6400 (PC5-51200) with CL32-39-39 timings at 1.40 V, giving high throughput for memory-bound workloads when the motherboard enables the EXPO profile.

How does the registered ECC design affect compatibility and error handling?

It is a 288-pin DDR5 RDIMM with on-die ECC plus module-level ECC, registered signalling, and AMD EXPO 1.1 support; it requires a platform that accepts registered DIMMs.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.