Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Single black DDR5 RDIMM module with heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KF564R32RBE2-32 32GB DDR5 6400 CL32 ECC RDIMM server RAM

SKU CH-K3NZ-QV2MX MPN KF564R32RBE2-32

32GB DDR5 RDIMM with ECC, registered signal, CL32 latency and 6400 MT/s speed

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL32
  • Timing32-39-39
  • Voltage1.40V

Capacity 32GB

Speed DDR5 6400 (PC5 51200)

Rank 2Rx8

  • 32GB capacity supports heavy workloads with ample memory headroom
  • DDR5 6400 speed with CL32 latency delivers fast registered data access
  • ECC and registered design detects and corrects errors for data integrity
  • AMD EXPO 1.1 profile enables automatic overclocking to rated timings
  • 288-pin RDIMM form factor fits compatible server and workstation boards

32GB DDR5-6400 ECC RDIMM

This 32GB Kingston Fury Renegade Pro module is a registered DDR5 DIMM with ECC and a CL32 latency profile. It targets workstation and high-end desktop builders who need data-integrity features alongside overclockable speeds. The single 2Rx8 module uses AMD EXPO v1.1 for automatic configuration.

Registered DDR5 platform limits

Registered DDR5 DIMMs add a buffer that stabilises heavy memory loads but introduces one extra cycle of latency versus unbuffered modules. The 1.40V operating voltage and 6400 MT/s data rate demand a motherboard with a validated DDR5 RDIMM topology and EXPO support. Overclocking headroom depends on the platform memory controller and BIOS quality.

Upgrade from slower or non-ECC DDR5

This module replaces slower DDR5 RDIMMs or non-ECC UDIMMs when error correction and registered signalling become mandatory for workload stability. The jump is worth it when moving to a platform that requires RDIMMs for capacity scaling or when multi-bit ECC protection is needed for professional data integrity.

I korthet

  • 32GB capacity supports heavy workloads with ample memory headroom
  • DDR5 6400 speed with CL32 latency delivers fast registered data access
  • ECC and registered design detects and corrects errors for data integrity
  • AMD EXPO 1.1 profile enables automatic overclocking to rated timings
  • 288-pin RDIMM form factor fits compatible server and workstation boards

Specifikationer

BrandKingston
SeriesFury Renegade Pro
ModelKF564R32RBE2-32
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL32
Timing32-39-39
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Multi-channel KitSingle Channel
BIOS/Performance ProfileAMD EXPO
Heat SpreaderYes
FeaturesKingston FURY KF564R32RBE2-32 is a 4G x 80-bit (32GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 2Rx8, ECC memory module, based on twenty 2G x 8-bit FBGA components per module. The module supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.
Fraktvikt0.05 kg
Paketstorlek171 × 57 × 13 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I pick the single 32 GB module or look for a multi-channel kit?

This is a single 32 GB module; if your platform benefits from dual-channel bandwidth, buy two identical sticks to populate paired slots.

What does 6400 MT/s actually deliver in a workstation?

The module runs at DDR5-6400 (PC5-51200) with CL32-39-39 timings at 1.40 V, giving high throughput for memory-bound workloads when the motherboard enables the EXPO profile.

How does the registered ECC design affect compatibility and error handling?

It is a 288-pin DDR5 RDIMM with on-die ECC plus module-level ECC, registered signalling, and AMD EXPO 1.1 support; it requires a platform that accepts registered DIMMs.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.