Lian Li O11DERGBX ATX Mid Tower PC Case
- ATX / Micro ATX Mid…
- Black
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Lian Li
White aluminium, steel and tempered-glass mid-tower supporting E-ATX boards, dual ARGB strips, top 420 mm radiator and up to 10 fans
Options White
The Lian Li O11DERGBW is a white ATX mid-tower chassis built from steel, aluminium and tempered glass. It accepts EATX boards under 280 mm as well as ATX, Micro-ATX and Mini-ITX, so it suits builders who want a clean showcase for high-end air or liquid cooling.
Dual ARGB strips line the top and bottom of the frame while the reversible layout and removable front pillar let you route airflow exactly as needed. The case supports up to ten fans in 120 mm or 140 mm sizes and radiators up to 420 mm on top, 360 mm on the side and 360 mm on the bottom, giving ample thermal headroom without dictating a specific power draw.
Three buttons on the front panel control the integrated lighting directly, removing the need for a separate controller or motherboard header. A single bottom dust filter and multiple drive brackets — two 3.5 inch bays in the cage, four 2.5 inch mounts on the side bracket and two more behind the motherboard tray — keep storage tidy and cables managed.
| Brand | LIAN LI |
|---|---|
| Model | O11DERGBW |
| Type | ATX / Micro ATX Mid Tower |
| Color | White |
| Case Material | Steel, Aluminum, Tempered glass |
| With Power Supply | No |
| Motherboard Compatibility | EATX(under 280mm)/ATX/MICRO-ATX/MINI-ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Dust Filters | 1 x Bottom |
| Internal 3.5" Drive Bays | Hard Drive Cage: 2 X 3.5" HDD or 2.5" SSD Side fan Bracket: 2 X 3.5" HDD or 4x 2.5" SSD |
| Internal 2.5" Drive Bays | Behind MB Tray: 2 X 2.5" SSD |
| Front Ports | 2 x USB 3.0, 1 x Audio, 3 x Buttons |
| Fan Options | Side: 120mm x3 / 140mm x3 Bottom: 120mm x3/ 140mm x3 Rear: 120 mm x1 Top: 120mm x3 / 140mm x3 |
| Pre-installed Fans | No Fan Installed |
| Radiator Options | Side: 360 / 280 /240 Bottom: 360 / 280 /240 Top: 360/ 420 /240 |
| Max GPU Length | 455.7 mm(Max) |
| Max CPU Cooler Height | 167 mm(Max) |
| Max PSU Length | ATX(under 220 mm) |
| Dimensions | 18.82" x 11.42" x 18.54" |
| Weight | 37.92 lbs. |
| Тегло на пратката | 17.16 kg |
| Размери на опаковката | 610 × 541 × 386 mm |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
The case allows a maximum GPU length of 455.7 mm. A side-mounted 360 mm radiator occupies the same chamber, so the card must not exceed the stated limit once the radiator and its fans are installed.
Four 2.5 inch SSDs mount on the side fan bracket, two more behind the motherboard tray, and the cage can hold two additional 2.5 inch drives, giving a total of eight bays.
The maximum CPU cooler height is 167 mm. Any cooler at or below that measurement will fit without touching the tempered glass side panel.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?