Lian Li O11DERGBX ATX Mid Tower PC Case
- ATX / Micro ATX Mid…
- Black
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Lian Li
White aluminium, steel and tempered-glass mid-tower supporting E-ATX boards, dual ARGB strips, top 420 mm radiator and up to 10 fans
Options White
The Lian Li O11DERGBW is a white ATX mid-tower chassis built from steel, aluminium and tempered glass. It accepts EATX boards under 280 mm as well as ATX, Micro-ATX and Mini-ITX, so it suits builders who want a clean showcase for high-end air or liquid cooling.
Dual ARGB strips line the top and bottom of the frame while the reversible layout and removable front pillar let you route airflow exactly as needed. The case supports up to ten fans in 120 mm or 140 mm sizes and radiators up to 420 mm on top, 360 mm on the side and 360 mm on the bottom, giving ample thermal headroom without dictating a specific power draw.
Three buttons on the front panel control the integrated lighting directly, removing the need for a separate controller or motherboard header. A single bottom dust filter and multiple drive brackets — two 3.5 inch bays in the cage, four 2.5 inch mounts on the side bracket and two more behind the motherboard tray — keep storage tidy and cables managed.
| Brand | LIAN LI |
|---|---|
| Model | O11DERGBW |
| Type | ATX / Micro ATX Mid Tower |
| Color | White |
| Case Material | Steel, Aluminum, Tempered glass |
| With Power Supply | No |
| Motherboard Compatibility | EATX(under 280mm)/ATX/MICRO-ATX/MINI-ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Dust Filters | 1 x Bottom |
| Internal 3.5" Drive Bays | Hard Drive Cage: 2 X 3.5" HDD or 2.5" SSD Side fan Bracket: 2 X 3.5" HDD or 4x 2.5" SSD |
| Internal 2.5" Drive Bays | Behind MB Tray: 2 X 2.5" SSD |
| Front Ports | 2 x USB 3.0, 1 x Audio, 3 x Buttons |
| Fan Options | Side: 120mm x3 / 140mm x3 Bottom: 120mm x3/ 140mm x3 Rear: 120 mm x1 Top: 120mm x3 / 140mm x3 |
| Pre-installed Fans | No Fan Installed |
| Radiator Options | Side: 360 / 280 /240 Bottom: 360 / 280 /240 Top: 360/ 420 /240 |
| Max GPU Length | 455.7 mm(Max) |
| Max CPU Cooler Height | 167 mm(Max) |
| Max PSU Length | ATX(under 220 mm) |
| Dimensions | 18.82" x 11.42" x 18.54" |
| Weight | 37.92 lbs. |
| Prepravná hmotnosť | 17.16 kg |
| Rozmery balenia | 610 × 541 × 386 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The case allows a maximum GPU length of 455.7 mm. A side-mounted 360 mm radiator occupies the same chamber, so the card must not exceed the stated limit once the radiator and its fans are installed.
Four 2.5 inch SSDs mount on the side fan bracket, two more behind the motherboard tray, and the cage can hold two additional 2.5 inch drives, giving a total of eight bays.
The maximum CPU cooler height is 167 mm. Any cooler at or below that measurement will fit without touching the tempered glass side panel.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?