Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Small rectangular LCD screen with resistive touch layer and microSD slot on a green circuit board

LORDWORLD

LORDWORLD 2.8inch Touch Display 320×240 for Raspberry Pi Pico development board

SKU CH-BND0-CRFRY

A 2.8-inch IPS touch screen with 320×240 resolution and 262K colours connects to Raspberry Pi Pico via SPI using an ST7789 driver and XPT2046 controller, and includes a MicroSD slot for image storage

  • 8 inch IPS screen shows 320×240 resolution with 262K colors for clear visuals
  • Dedicated XPT2046 touch controller delivers smoother input than AD-controlled alternatives
  • MicroSD card slot stores images for direct on-screen display without extra hardware
  • Programmable backlight control reduces power draw during battery operation
  • Includes C/C++ and MicroPython examples for faster Raspberry Pi Pico development

Compact display for Pico projects

This 2.8 inch touch display is built for the Raspberry Pi Pico development board and connects through the SPI bus. It shows a 320×240 resolution on an IPS panel with 262K colours. A dedicated XPT2046 resistive touch controller provides smoother input than ADC-only solutions, and the ST7789 driver handles the screen.

Makers adding a small GUI

The module suits hobbyists and engineers who need a colour touchscreen for Pico-based prototypes, data logging or simple interfaces. Projects that require capacitive multi-touch, higher pixel density or a larger viewing area will not be satisfied by this resistive 2.8 inch panel.

Ready-to-run code and storage

A MicroSD card slot lets you store images and display them directly without extra hardware. Programmable backlight control helps reduce power draw in battery-powered builds. The package includes development resources and a manual with C/C++ and MicroPython examples so you can start writing code immediately.

Акценти

  • 8 inch IPS screen shows 320×240 resolution with 262K colors for clear visuals
  • Dedicated XPT2046 touch controller delivers smoother input than AD-controlled alternatives
  • MicroSD card slot stores images for direct on-screen display without extra hardware
  • Programmable backlight control reduces power draw during battery operation
  • Includes C/C++ and MicroPython examples for faster Raspberry Pi Pico development

Спецификации

BrandLORDWORLD

Въпроси за този артикул

Do I need a Raspberry Pi Pico board to use this 2.8 inch display?

Yes, the module is designed to plug directly into a Raspberry Pi Pico mini board and communicates over the SPI bus.

Can I keep using the Pico's GPIO pins for other sensors while this display is attached?

The display uses the SPI bus and touch controller XPT2046, so any pins not occupied by that interface remain free for additional hardware.

How can I verify the ST7789 driver and XPT2046 touch controller are working after wiring it up?

Run the supplied C/C++ or MicroPython examples; they initialise the 320×240 IPS panel, show 262K-colour graphics and respond to resistive touch input.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.