我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Small rectangular LCD screen with resistive touch layer and microSD slot on a green circuit board

LORDWORLD

LORDWORLD 2.8inch Touch Display 320×240 for Raspberry Pi Pico development board

SKU CH-BND0-CRFRY

A 2.8-inch IPS touch screen with 320×240 resolution and 262K colours connects to Raspberry Pi Pico via SPI using an ST7789 driver and XPT2046 controller, and includes a MicroSD slot for image storage

  • 8 inch IPS screen shows 320×240 resolution with 262K colors for clear visuals
  • Dedicated XPT2046 touch controller delivers smoother input than AD-controlled alternatives
  • MicroSD card slot stores images for direct on-screen display without extra hardware
  • Programmable backlight control reduces power draw during battery operation
  • Includes C/C++ and MicroPython examples for faster Raspberry Pi Pico development

Compact display for Pico projects

This 2.8 inch touch display is built for the Raspberry Pi Pico development board and connects through the SPI bus. It shows a 320×240 resolution on an IPS panel with 262K colours. A dedicated XPT2046 resistive touch controller provides smoother input than ADC-only solutions, and the ST7789 driver handles the screen.

Makers adding a small GUI

The module suits hobbyists and engineers who need a colour touchscreen for Pico-based prototypes, data logging or simple interfaces. Projects that require capacitive multi-touch, higher pixel density or a larger viewing area will not be satisfied by this resistive 2.8 inch panel.

Ready-to-run code and storage

A MicroSD card slot lets you store images and display them directly without extra hardware. Programmable backlight control helps reduce power draw in battery-powered builds. The package includes development resources and a manual with C/C++ and MicroPython examples so you can start writing code immediately.

商品特色

  • 8 inch IPS screen shows 320×240 resolution with 262K colors for clear visuals
  • Dedicated XPT2046 touch controller delivers smoother input than AD-controlled alternatives
  • MicroSD card slot stores images for direct on-screen display without extra hardware
  • Programmable backlight control reduces power draw during battery operation
  • Includes C/C++ and MicroPython examples for faster Raspberry Pi Pico development

商品規格

BrandLORDWORLD

商品問答

Do I need a Raspberry Pi Pico board to use this 2.8 inch display?

Yes, the module is designed to plug directly into a Raspberry Pi Pico mini board and communicates over the SPI bus.

Can I keep using the Pico's GPIO pins for other sensors while this display is attached?

The display uses the SPI bus and touch controller XPT2046, so any pins not occupied by that interface remain free for additional hardware.

How can I verify the ST7789 driver and XPT2046 touch controller are working after wiring it up?

Run the supplied C/C++ or MicroPython examples; they initialise the 320×240 IPS panel, show 262K-colour graphics and respond to resistive touch input.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。