SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Maxtor
A 40 GB 3.5-inch IDE desktop drive spinning at 7200 RPM with 2 MB cache and fluid-bearing motor for quiet operation
The Maxtor DiamondMax Plus 8 6E040L0 is a 40GB desktop hard drive built for legacy systems that still require an IDE Ultra ATA133 connection. It suits enthusiasts restoring vintage PCs, industrial equipment needing a direct replacement, or anyone adding period-correct storage to a retro build.
The bare-drive unit uses a standard 3.5 inch form factor with a 40-pin IDE interface, so it drops into older drive bays without adapters. A fluid dynamic bearing motor and low-profile height improve airflow inside tight chassis, while the Shock Protection System and Data Protection System are designed to guard platters during handling and operation.
The FDB motor keeps acoustic output low during typical desktop workloads. At 7200 RPM the drive draws modest power and runs cool enough for passively ventilated cases. Average seek time is 10ms with 4.17ms latency, delivering responsive access for operating systems and applications of the era.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax Plus 8 |
| Model | 6E040L0 |
| Packaging | Bare Drive |
| Interface | IDE Ultra ATA133 / ATA-7 |
| Capacity | 40GB |
| RPM | 7200 RPM |
| Cache | 2MB |
| Average Seek Time | 10ms |
| Average Latency | 4.17ms |
| Features | FDB (fluid dynamic bearing) motor for quiet operation Low height to improve airflow and cooling Low weight to reduce shipping costs RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Тегло на пратката | 0.69 kg |
| Размери на опаковката | 203 × 152 × 51 mm |
The IDE Ultra ATA133 interface caps the burst transfer rate at 133 MB/s.
The 3.5-inch form factor requires a standard 3.5-inch drive bay with four side-mount screws or a tool-less tray.
Move the jumper shunt on the rear pins to Master, Slave or Cable Select to match your IDE cable configuration.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?