Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Silver 3.5 inch bare hard drive with exposed circuit board

Maxtor

Maxtor 6E040L0 40GB 7200 RPM 2MB IDE Ultra ATA133 3.5" internal hard drive

SKU CH-REP4-VEGXN MPN 6E040L0

A 40 GB 3.5-inch IDE desktop drive spinning at 7200 RPM with 2 MB cache and fluid-bearing motor for quiet operation

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity40GB
  • RPM7200 RPM
  • Cache2MB
  • Average Seek Time10ms
  • 7200 RPM spindle delivers responsive data access
  • 40 GB capacity stores essential files and applications
  • 2 MB cache buffers frequent read requests
  • Fluid dynamic bearing motor reduces acoustic noise
  • Shock and Data Protection Systems guard stored information

Target system and purpose

The Maxtor DiamondMax Plus 8 6E040L0 is a 40GB desktop hard drive built for legacy systems that still require an IDE Ultra ATA133 connection. It suits enthusiasts restoring vintage PCs, industrial equipment needing a direct replacement, or anyone adding period-correct storage to a retro build.

Build and connectivity

The bare-drive unit uses a standard 3.5 inch form factor with a 40-pin IDE interface, so it drops into older drive bays without adapters. A fluid dynamic bearing motor and low-profile height improve airflow inside tight chassis, while the Shock Protection System and Data Protection System are designed to guard platters during handling and operation.

Thermals, noise and power

The FDB motor keeps acoustic output low during typical desktop workloads. At 7200 RPM the drive draws modest power and runs cool enough for passively ventilated cases. Average seek time is 10ms with 4.17ms latency, delivering responsive access for operating systems and applications of the era.

Høydepunkter

  • 7200 RPM spindle delivers responsive data access
  • 40 GB capacity stores essential files and applications
  • 2 MB cache buffers frequent read requests
  • Fluid dynamic bearing motor reduces acoustic noise
  • Shock and Data Protection Systems guard stored information

Spesifikasjoner

BrandMaxtor
SeriesDiamondMax Plus 8
Model6E040L0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity40GB
RPM7200 RPM
Cache2MB
Average Seek Time10ms
Average Latency4.17ms
FeaturesFDB (fluid dynamic bearing) motor for quiet operation
Low height to improve airflow and cooling
Low weight to reduce shipping costs
RoHS compliant
Improved reliability with:
Shock Protection System
Data Protection System
Form Factor3.5"
Fraktvekt0.69 kg
Pakkestørrelse203 × 152 × 51 mm

Spørsmål om denne varen

What does the IDE Ultra ATA133 interface cap the transfer rate at?

The IDE Ultra ATA133 interface caps the burst transfer rate at 133 MB/s.

What physical space and mounting does the 3.5-inch form factor need?

The 3.5-inch form factor requires a standard 3.5-inch drive bay with four side-mount screws or a tool-less tray.

How do I set the drive to master or slave before installing it?

Move the jumper shunt on the rear pins to Master, Slave or Cable Select to match your IDE cable configuration.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.