myVolts
myVolts 450W 12V DC ATX Pico PSU 64x39x16mm
Fanless 12 V DC-ATX pico PSU delivers 450 W peak power in a 64 x 39 x 16 mm module with solid-polymer capacitors and full protection
- TypeAT
- Fanless design runs completely silent
- 450 W peak output from a 12 V DC source
- Over-current and short-circuit protection safeguards components
- Solid polymer capacitors extend operational lifespan
- Compact 64 x 39 x 16 mm footprint fits tight builds
Compact Pico PSU for 12 V DC systems
This 450 W Pico PSU accepts a 12 V DC input and delivers standard ATX power through a 24-pin connector. It suits Mini-ITX builds, embedded appliances or industrial rigs that run from a 12 V brick or battery bank. The 64 x 39 x 16 mm footprint lets it tuck behind a motherboard or inside a slim enclosure.
Fanless construction with polymer capacitors
A fanless design means completely silent operation and no moving parts to wear out. Solid polymer capacitors on the PCB provide long life and high temperature resistance. Over-current and short-circuit protection guard connected components. The included cable set connects the 24-pin ATX header and peripheral leads for daily use.
450 W peak from a 12 V DC source
The single decisive figure is the 450 W peak output while drawing from a 12 V DC supply. Systems whose combined CPU, GPU and drive load exceeds this limit will need a higher-capacity DC-ATX unit or a traditional AC PSU. Builders who require an ATX12VO connector or a different input voltage should look elsewhere.
Акценти
- Fanless design runs completely silent
- 450 W peak output from a 12 V DC source
- Over-current and short-circuit protection safeguards components
- Solid polymer capacitors extend operational lifespan
- Compact 64 x 39 x 16 mm footprint fits tight builds
Спецификации
| Type | AT |
|---|
Въпроси за този артикул
What 12 V DC input does the 450 W pico PSU accept?
The unit takes a 12 V DC source and delivers up to 450 W peak output through its 24-pin ATX connector.
Will the 64x39x16 mm board fit my Mini-ITX case?
At 64 mm long, 39 mm wide and 16 mm thick it matches the standard pico-PSU footprint used in most Mini-ITX chassis.
How do I connect the included cable set without shorting the 24-pin header?
Plug the 24-pin block into the motherboard first, then attach the DC input cable; the keyed connector prevents reverse insertion.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.



