暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

myVolts

myVolts 450W 12V DC ATX Pico PSU 64x39x16mm

SKU CH-87MR-M1Z92

Fanless 12 V DC-ATX pico PSU delivers 450 W peak power in a 64 x 39 x 16 mm module with solid-polymer capacitors and full protection

  • TypeAT
  • Fanless design runs completely silent
  • 450 W peak output from a 12 V DC source
  • Over-current and short-circuit protection safeguards components
  • Solid polymer capacitors extend operational lifespan
  • Compact 64 x 39 x 16 mm footprint fits tight builds

Compact Pico PSU for 12 V DC systems

This 450 W Pico PSU accepts a 12 V DC input and delivers standard ATX power through a 24-pin connector. It suits Mini-ITX builds, embedded appliances or industrial rigs that run from a 12 V brick or battery bank. The 64 x 39 x 16 mm footprint lets it tuck behind a motherboard or inside a slim enclosure.

Fanless construction with polymer capacitors

A fanless design means completely silent operation and no moving parts to wear out. Solid polymer capacitors on the PCB provide long life and high temperature resistance. Over-current and short-circuit protection guard connected components. The included cable set connects the 24-pin ATX header and peripheral leads for daily use.

450 W peak from a 12 V DC source

The single decisive figure is the 450 W peak output while drawing from a 12 V DC supply. Systems whose combined CPU, GPU and drive load exceeds this limit will need a higher-capacity DC-ATX unit or a traditional AC PSU. Builders who require an ATX12VO connector or a different input voltage should look elsewhere.

特長

  • Fanless design runs completely silent
  • 450 W peak output from a 12 V DC source
  • Over-current and short-circuit protection safeguards components
  • Solid polymer capacitors extend operational lifespan
  • Compact 64 x 39 x 16 mm footprint fits tight builds

仕様

TypeAT

この商品に関する質問

What 12 V DC input does the 450 W pico PSU accept?

The unit takes a 12 V DC source and delivers up to 450 W peak output through its 24-pin ATX connector.

Will the 64x39x16 mm board fit my Mini-ITX case?

At 64 mm long, 39 mm wide and 16 mm thick it matches the standard pico-PSU footprint used in most Mini-ITX chassis.

How do I connect the included cable set without shorting the 24-pin header?

Plug the 24-pin block into the motherboard first, then attach the DC input cable; the keyed connector prevents reverse insertion.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。