Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Two green DDR4 UDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V 288-Pin UDIMM Kit for Supermicro X12SCQ/X12SCZ-QF

SKU CH-5KMF-Z2M0C

16 GB dual-channel DDR4 kit rated at 2933 MHz, CL21, 1.2 V for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 16GB 2X8GB

  • 16 GB dual-channel kit gives full capacity at rated speed
  • CL21 timing matches the memory controller for stable operation
  • 2 V DDR4 modules run at standard voltage without extra power draw
  • 288-pin UDIMM form factor fits the Supermicro X12SCQ and X12SCZ-QF boards
  • Built with Samsung, Micron or Hynix chips and tested at 2933 MHz

Targeted DDR4 upgrade

This 16 GB kit delivers two 8 GB UDIMM modules rated at DDR4 2933 with CL21 timings and 1.2 V operation. It is built specifically for Supermicro X12SCQ and X12SCZ-QF motherboards that require non-ECC unbuffered memory in the 288-pin form factor.

Build integration

The modules plug directly into standard DDR4 UDIMM slots and draw 1.2 V without additional power cables or cooling hardware. Using two matched sticks lets the board run in dual-channel mode, freeing remaining slots for future expansion while keeping the memory controller at its native voltage and timing.

Sustained-load behaviour

Major OEM chips from Samsung, Micron or Hynix are tested at the rated 2933 MT/s speed, CL21 latency and 1.2 V voltage to maintain stability during extended workloads. The 1Rx8 organisation ensures consistent signalling without the extra buffering overhead that server-oriented modules would introduce.

Акценти

  • 16 GB dual-channel kit gives full capacity at rated speed
  • CL21 timing matches the memory controller for stable operation
  • 2 V DDR4 modules run at standard voltage without extra power draw
  • 288-pin UDIMM form factor fits the Supermicro X12SCQ and X12SCZ-QF boards
  • Built with Samsung, Micron or Hynix chips and tested at 2933 MHz

Спецификации

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Does the CL21 latency limit throughput when the kit runs at 2933 MT/s for long periods?

The kit operates at its rated CL21 timing and 2933 MT/s speed under standard JEDEC voltage, so latency stays within spec during sustained workloads.

How much heat or power does the 1.2 V, heat-spreader-less 16 GB kit produce in all-day use?

At 1.2 V the modules draw only standard DDR4 power and run without a heat spreader, keeping thermals low for continuous operation.

Which motherboard slot and population rules must my Supermicro X12SCQ or X12SCZ-QF already have free for this 288-pin UDIMM kit?

The board needs two free 288-pin UDIMM slots populated in the order the manual specifies; the kit is validated for that exact platform.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.