نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR4 UDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V 288-Pin UDIMM Kit for Supermicro X12SCQ/X12SCZ-QF

SKU CH-5KMF-Z2M0C

16 GB dual-channel DDR4 kit rated at 2933 MHz, CL21, 1.2 V for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 16GB 2X8GB

  • 16 GB dual-channel kit gives full capacity at rated speed
  • CL21 timing matches the memory controller for stable operation
  • 2 V DDR4 modules run at standard voltage without extra power draw
  • 288-pin UDIMM form factor fits the Supermicro X12SCQ and X12SCZ-QF boards
  • Built with Samsung, Micron or Hynix chips and tested at 2933 MHz

Targeted DDR4 upgrade

This 16 GB kit delivers two 8 GB UDIMM modules rated at DDR4 2933 with CL21 timings and 1.2 V operation. It is built specifically for Supermicro X12SCQ and X12SCZ-QF motherboards that require non-ECC unbuffered memory in the 288-pin form factor.

Build integration

The modules plug directly into standard DDR4 UDIMM slots and draw 1.2 V without additional power cables or cooling hardware. Using two matched sticks lets the board run in dual-channel mode, freeing remaining slots for future expansion while keeping the memory controller at its native voltage and timing.

Sustained-load behaviour

Major OEM chips from Samsung, Micron or Hynix are tested at the rated 2933 MT/s speed, CL21 latency and 1.2 V voltage to maintain stability during extended workloads. The 1Rx8 organisation ensures consistent signalling without the extra buffering overhead that server-oriented modules would introduce.

أبرز المميزات

  • 16 GB dual-channel kit gives full capacity at rated speed
  • CL21 timing matches the memory controller for stable operation
  • 2 V DDR4 modules run at standard voltage without extra power draw
  • 288-pin UDIMM form factor fits the Supermicro X12SCQ and X12SCZ-QF boards
  • Built with Samsung, Micron or Hynix chips and tested at 2933 MHz

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the CL21 latency limit throughput when the kit runs at 2933 MT/s for long periods?

The kit operates at its rated CL21 timing and 2933 MT/s speed under standard JEDEC voltage, so latency stays within spec during sustained workloads.

How much heat or power does the 1.2 V, heat-spreader-less 16 GB kit produce in all-day use?

At 1.2 V the modules draw only standard DDR4 power and run without a heat spreader, keeping thermals low for continuous operation.

Which motherboard slot and population rules must my Supermicro X12SCQ or X12SCZ-QF already have free for this 288-pin UDIMM kit?

The board needs two free 288-pin UDIMM slots populated in the order the manual specifies; the kit is validated for that exact platform.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.