Tripp Lite
Tripp Lite PDUMNH15 Monitored 1U PDU 120V 15A 8x 5-15R
- Monitored
- 1U
328,99 щ.д.
0.00419705BTC
В наличност
OEM Industries
OEM Industries BG0703-B044-00L 02 12V .38A 3 Pin Blower Fan
A 12 V, 0.38 A blower fan with dual ball bearings and a three-pin power connector
- ColorBlack
- TypeFan only
- Bearing Type2 Ball
- Power Connector3 Pin
- LEDNo
- Original NMB-MAT blower delivers targeted airflow for projector cooling
- 12 V .38 A power draw keeps energy use low
- 3-pin connector enables direct motherboard or controller hookup
- Dual ball bearings extend operating life and reduce noise
- Compact black fan-only design fits tight chassis spaces
Replacement blower for projector cooling
The OEM Industries BG0703-B044-00L 02 is a 12 V DC blower rated at 0.38 A with a three-pin power connector. It uses a dual-ball bearing assembly and has no integrated lighting. The unit is supplied as a fan-only module in a black finish.
Direct swap for worn NMB-MAT units
This blower matches the original NMB-MAT BG0703-B044-00L 02 specification, so it fits the same mounting points and voltage rail without modification. The upgrade is worthwhile when the existing fan develops bearing noise, speed loss or complete failure.
Suits technicians servicing compatible projectors
The part is intended for repair professionals who need an exact electrical and mechanical replacement. It is not suitable for general PC case ventilation, CPU cooler builds or any application requiring PWM speed control or a four-pin connector.
Акценти
- Original NMB-MAT blower delivers targeted airflow for projector cooling
- 12 V .38 A power draw keeps energy use low
- 3-pin connector enables direct motherboard or controller hookup
- Dual ball bearings extend operating life and reduce noise
- Compact black fan-only design fits tight chassis spaces
Спецификации
| Model | BG0703-B044-00L |
|---|---|
| Color | Black |
| Type | Fan only |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| LED | No |
Въпроси за този артикул
What power connector does the BG0703-B044-00L blower use?
The blower connects via a 3-pin power connector that plugs directly into a standard 3-pin or 4-pin fan header supplying 12 V.
Which step is most often missed when fitting this blower in a projector?
Align the blower's mounting holes before tightening screws, and verify the 3-pin plug is fully seated so the tachometer signal reaches the controller.
When should the 2-ball bearing blower be inspected or replaced?
Inspect the 2-ball bearing unit after 24 months of continuous use; replace it if airflow drops or audible bearing noise appears.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
