暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 3-pin DC blower fan with two ball bearings

OEM Industries

OEM Industries BG0703-B044-00L 02 12V .38A 3 Pin Blower Fan

SKU CH-2S3C-65YND

A 12 V, 0.38 A blower fan with dual ball bearings and a three-pin power connector

  • ColorBlack
  • TypeFan only
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • Original NMB-MAT blower delivers targeted airflow for projector cooling
  • 12 V .38 A power draw keeps energy use low
  • 3-pin connector enables direct motherboard or controller hookup
  • Dual ball bearings extend operating life and reduce noise
  • Compact black fan-only design fits tight chassis spaces

Replacement blower for projector cooling

The OEM Industries BG0703-B044-00L 02 is a 12 V DC blower rated at 0.38 A with a three-pin power connector. It uses a dual-ball bearing assembly and has no integrated lighting. The unit is supplied as a fan-only module in a black finish.

Direct swap for worn NMB-MAT units

This blower matches the original NMB-MAT BG0703-B044-00L 02 specification, so it fits the same mounting points and voltage rail without modification. The upgrade is worthwhile when the existing fan develops bearing noise, speed loss or complete failure.

Suits technicians servicing compatible projectors

The part is intended for repair professionals who need an exact electrical and mechanical replacement. It is not suitable for general PC case ventilation, CPU cooler builds or any application requiring PWM speed control or a four-pin connector.

特長

  • Original NMB-MAT blower delivers targeted airflow for projector cooling
  • 12 V .38 A power draw keeps energy use low
  • 3-pin connector enables direct motherboard or controller hookup
  • Dual ball bearings extend operating life and reduce noise
  • Compact black fan-only design fits tight chassis spaces

仕様

ModelBG0703-B044-00L
ColorBlack
TypeFan only
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

この商品に関する質問

What power connector does the BG0703-B044-00L blower use?

The blower connects via a 3-pin power connector that plugs directly into a standard 3-pin or 4-pin fan header supplying 12 V.

Which step is most often missed when fitting this blower in a projector?

Align the blower's mounting holes before tightening screws, and verify the 3-pin plug is fully seated so the tachometer signal reaches the controller.

When should the 2-ball bearing blower be inspected or replaced?

Inspect the 2-ball bearing unit after 24 months of continuous use; replace it if airflow drops or audible bearing noise appears.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。