Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black square 60mm CPU cooler with maglev fan 12V 2.4W 3-wire

OEM Industries

OEM Industries GM1206PHVX-A 60mm Maglev CPU cooler 12V 2.4W 3-Wire

SKU CH-09C3-XBD7H

A 60 mm maglev fan rated at 12 V and 2.4 W with a three-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeMaglev
  • Power Connector3 Wires
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 60 mm square frame fits tight chassis spaces
  • 12 V 2.4 W draw keeps power use low
  • Three-wire connector enables speed monitoring
  • Black finish matches dark-themed builds

60 mm Maglev CPU Cooler Fan

The OEM Industries GM1206PHVX-A is a 60 mm square cooler with a 15 mm thick maglev fan. It runs on 12 V and draws 2.4 W through a three-wire power connector. No LED lighting is included.

Who This Suits and Who It Does Not

Builders needing a compact 60 mm cooler with maglev bearing for low noise will find it suitable. Buyers who need a larger fan diameter, higher airflow, or a four-pin PWM connector should look elsewhere.

Key Specification: 60 mm Maglev Fan

The 60 mm maglev fan with 12 V 2.4 W rating and three-wire connector is the deciding spec. Verify your motherboard header and case clearance match these exact dimensions before ordering.

Акценти

  • Maglev bearing reduces friction for longer life
  • 60 mm square frame fits tight chassis spaces
  • 12 V 2.4 W draw keeps power use low
  • Three-wire connector enables speed monitoring
  • Black finish matches dark-themed builds

Спецификации

ModelGM1206PHVX-A
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeMaglev
Power Connector3 Wires
LEDNo

Въпроси за този артикул

Does the 60 mm square cooler need a 60 mm mounting pattern on the CPU socket?

The cooler measures 60 mm by 60 mm and is 15 mm thick, so it requires a 60 mm square mounting footprint on the motherboard.

How do I connect the 3-wire fan to the motherboard and what step is often missed?

Plug the 3-wire connector into a 12 V CPU fan header; the third wire carries the tachometer signal, which must be connected for the BIOS to report fan speed.

When will the maglev bearing need attention or replacement?

Maglev bearings have no physical contact, so they do not wear like sleeve or ball bearings; the fan runs at 12 V and 2.4 W continuously without scheduled maintenance.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.