Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black square 60mm CPU cooler with maglev fan 12V 2.4W 3-wire

OEM Industries

OEM Industries GM1206PHVX-A 60mm Maglev CPU cooler 12V 2.4W 3-Wire

SKU CH-09C3-XBD7H

A 60 mm maglev fan rated at 12 V and 2.4 W with a three-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeMaglev
  • Power Connector3 Wires
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 60 mm square frame fits tight chassis spaces
  • 12 V 2.4 W draw keeps power use low
  • Three-wire connector enables speed monitoring
  • Black finish matches dark-themed builds

60 mm Maglev CPU Cooler Fan

The OEM Industries GM1206PHVX-A is a 60 mm square cooler with a 15 mm thick maglev fan. It runs on 12 V and draws 2.4 W through a three-wire power connector. No LED lighting is included.

Who This Suits and Who It Does Not

Builders needing a compact 60 mm cooler with maglev bearing for low noise will find it suitable. Buyers who need a larger fan diameter, higher airflow, or a four-pin PWM connector should look elsewhere.

Key Specification: 60 mm Maglev Fan

The 60 mm maglev fan with 12 V 2.4 W rating and three-wire connector is the deciding spec. Verify your motherboard header and case clearance match these exact dimensions before ordering.

Puncte forte

  • Maglev bearing reduces friction for longer life
  • 60 mm square frame fits tight chassis spaces
  • 12 V 2.4 W draw keeps power use low
  • Three-wire connector enables speed monitoring
  • Black finish matches dark-themed builds

Specificații

ModelGM1206PHVX-A
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeMaglev
Power Connector3 Wires
LEDNo

Întrebări despre acest articol

Does the 60 mm square cooler need a 60 mm mounting pattern on the CPU socket?

The cooler measures 60 mm by 60 mm and is 15 mm thick, so it requires a 60 mm square mounting footprint on the motherboard.

How do I connect the 3-wire fan to the motherboard and what step is often missed?

Plug the 3-wire connector into a 12 V CPU fan header; the third wire carries the tachometer signal, which must be connected for the BIOS to report fan speed.

When will the maglev bearing need attention or replacement?

Maglev bearings have no physical contact, so they do not wear like sleeve or ball bearings; the fan runs at 12 V and 2.4 W continuously without scheduled maintenance.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.