Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Two green 240-pin DDR3L ECC registered RDIMM modules

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 1Rx4 240-pin 1.35V ECC Registered RDIMM memory upgrade

SKU CH-XNAN-3XM2B

16 GB dual-channel DDR3L 1600 CL11 ECC registered kit for Supermicro X9DAL, X9DAX, X9DB3, X9DBi and X9DBL motherboards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands workstation memory capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • Qualified for Supermicro X9DAL, X9DAX, X9DB3, X9DBi, X9DBL boards
  • Replaces Supermicro MEMDR380LHL07ER16 and related part numbers

Server ECC RDIMM kit

This 16 GB kit contains two 8 GB DDR3L 1600 CL11 modules built to the PC3L-12800 standard. Each stick is a 240-pin registered DIMM with ECC and a 1Rx4 organisation, running at 1.35 V. It is engineered for workstation and server boards that require registered ECC memory. ||

Supermicro X9 series compatibility

The modules are validated for Supermicro X9DAL, X9DAX, X9DB3, X9DBi and X9DBL motherboards and replace Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16. Desktop boards that accept only unbuffered non-ECC DIMMs cannot use this kit, and the registered design prevents mixing with unbuffered memory in the same system. ||

Registered ECC requirement

The single specification that decides fit is the registered ECC RDIMM design; only platforms that explicitly support registered ECC DDR3L at 1.35 V will POST with these modules.

Акценти

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands workstation memory capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • Qualified for Supermicro X9DAL, X9DAX, X9DB3, X9DBi, X9DBL boards
  • Replaces Supermicro MEMDR380LHL07ER16 and related part numbers

Спецификации

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DAL Series
Supermicro Motherboard X9DAX Series
Supermicro Motherboard X9DB3 Series
Supermicro Motherboard X9DBi Series
Supermicro Motherboard X9DBL Series

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Should I choose the 16GB kit or add a single 8GB module to my server?

The kit contains two matched 8GB modules totalling 16GB, which lets you populate a pair of slots for dual-channel operation on compatible Supermicro X9 boards.

What does the PC3L-12800 rating mean for actual throughput in my workstation?

It indicates a maximum transfer rate of 12800 MB/s at 1600 MT/s, so the memory can sustain that bandwidth when the platform runs at the rated speed.

Is the 240-pin DDR3L ECC registered interface compatible with standard desktop motherboards?

No — the modules are ECC registered DDR3L RDIMMs designed for Supermicro X9DAL, X9DAX, X9DB3, X9DBi and X9DBL server boards and will not work in unbuffered desktop slots.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.