Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green circuit board with black memory chips and gold edge connector

OWC

OWC 4GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM for Dell OptiPlex 3011 AIO memory upgrade

SKU CH-CMX8-5482N

A 4 GB DDR3 1600 MHz SODIMM module designed to upgrade Dell OptiPlex 3011 all-in-one systems

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 4 GB capacity adds multitasking headroom for Dell OptiPlex 3011 AIO
  • DDR3 1600 CL11 timing matches system specification for stable operation
  • 5 V JEDEC voltage ensures warranty-safe upgrade without BIOS changes
  • 204-pin SODIMM form factor fits the OptiPlex 3011 AIO memory slot directly
  • 2Rx8 dual-rank organisation increases memory density in a single module

System-specific DDR3 SODIMM for Dell OptiPlex 3011

This OWC module adds 4GB of DDR3 1600 memory to a Dell OptiPlex 3011 all-in-one desktop. It is built for owners who need a straightforward capacity increase to improve multitasking and general responsiveness. The stick is a single 4GB unit rated at PC3-12800 with CL11 latency. It suits users upgrading that specific model only.

Fits the SODIMM slot in the OptiPlex 3011 AIO

Installation uses the existing 204-pin DDR3 SO-DIMM socket inside the all-in-one chassis. The module is unbuffered, non-ECC and runs at the standard 1.5V JEDEC voltage, so it works with the system memory controller without configuration changes. Adding this stick frees up the remaining slot for a second module if the board supports two. Builders needing ECC or registered memory cannot use this product.

Standard voltage keeps thermals simple

Operating at 1.5V, the module draws the same power as the original factory memory and produces no extra heat that would affect the compact all-in-one cooling. There is no heat spreader, so airflow from the system fan passes directly over the components. Acoustic profile remains unchanged because the upgrade adds no moving parts. The JEDEC-compliant design ensures stable operation within the existing thermal envelope.

Акценти

  • 4 GB capacity adds multitasking headroom for Dell OptiPlex 3011 AIO
  • DDR3 1600 CL11 timing matches system specification for stable operation
  • 5 V JEDEC voltage ensures warranty-safe upgrade without BIOS changes
  • 204-pin SODIMM form factor fits the OptiPlex 3011 AIO memory slot directly
  • 2Rx8 dual-rank organisation increases memory density in a single module

Спецификации

BrandOWC
Part Number1S6D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3011 AIO

Въпроси за този артикул

Will the CL11 latency become a bottleneck during sustained heavy workloads?

CL11 is the standard timing for DDR3 1600 modules and matches the JEDEC specification this memory follows.

Does the module run hot or draw extra power during all-day operation?

It operates at the standard 1.5 V DDR3 voltage with no heat spreader, so thermal output and power draw stay within normal SODIMM limits.

What slot type must the OptiPlex 3011 AIO already have for this upgrade to fit?

The system needs an empty 204-pin DDR3 SODIMM slot, which is the standard memory socket in that all-in-one model.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.