BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279516BTC
Na zalogi
OWC
OWC 4GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM for Dell OptiPlex 3011 AIO memory upgrade
A 4 GB DDR3 1600 MHz SODIMM module designed to upgrade Dell OptiPlex 3011 all-in-one systems
- Capacity4GB
- Type204-Pin DDR3 Non-ECC SODIMM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.5V
- ECCNo
- 4 GB capacity adds multitasking headroom for Dell OptiPlex 3011 AIO
- DDR3 1600 CL11 timing matches system specification for stable operation
- 5 V JEDEC voltage ensures warranty-safe upgrade without BIOS changes
- 204-pin SODIMM form factor fits the OptiPlex 3011 AIO memory slot directly
- 2Rx8 dual-rank organisation increases memory density in a single module
System-specific DDR3 SODIMM for Dell OptiPlex 3011
This OWC module adds 4GB of DDR3 1600 memory to a Dell OptiPlex 3011 all-in-one desktop. It is built for owners who need a straightforward capacity increase to improve multitasking and general responsiveness. The stick is a single 4GB unit rated at PC3-12800 with CL11 latency. It suits users upgrading that specific model only.
Fits the SODIMM slot in the OptiPlex 3011 AIO
Installation uses the existing 204-pin DDR3 SO-DIMM socket inside the all-in-one chassis. The module is unbuffered, non-ECC and runs at the standard 1.5V JEDEC voltage, so it works with the system memory controller without configuration changes. Adding this stick frees up the remaining slot for a second module if the board supports two. Builders needing ECC or registered memory cannot use this product.
Standard voltage keeps thermals simple
Operating at 1.5V, the module draws the same power as the original factory memory and produces no extra heat that would affect the compact all-in-one cooling. There is no heat spreader, so airflow from the system fan passes directly over the components. Acoustic profile remains unchanged because the upgrade adds no moving parts. The JEDEC-compliant design ensures stable operation within the existing thermal envelope.
Poudarki
- 4 GB capacity adds multitasking headroom for Dell OptiPlex 3011 AIO
- DDR3 1600 CL11 timing matches system specification for stable operation
- 5 V JEDEC voltage ensures warranty-safe upgrade without BIOS changes
- 204-pin SODIMM form factor fits the OptiPlex 3011 AIO memory slot directly
- 2Rx8 dual-rank organisation increases memory density in a single module
Specifikacije
| Brand | OWC |
|---|---|
| Part Number | 1S6D32R804GB |
| Capacity | 4GB |
| Type | 204-Pin DDR3 Non-ECC SODIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Dell OptiPlex 3011 AIO |
Vprašanja o tem izdelku
Will the CL11 latency become a bottleneck during sustained heavy workloads?
CL11 is the standard timing for DDR3 1600 modules and matches the JEDEC specification this memory follows.
Does the module run hot or draw extra power during all-day operation?
It operates at the standard 1.5 V DDR3 voltage with no heat spreader, so thermal output and power draw stay within normal SODIMM limits.
What slot type must the OptiPlex 3011 AIO already have for this upgrade to fit?
The system needs an empty 204-pin DDR3 SODIMM slot, which is the standard memory socket in that all-in-one model.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
