BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Patriot Memory
A 16 GB dual-channel DDR3 1600 kit with CL10 timing and a heat spreader
This Patriot Viper 3 kit provides 16GB of DDR3 memory across two 8GB modules. It runs at 1600MHz with a CAS latency of CL10 and timings of 10-10-10-27 at 1.50V. A custom heat shield is fitted to each module for thermal management. The kit is XMP 1.3 ready and hand-tested for stability.
The dual-channel configuration suits owners of DDR3-compatible Intel or AMD platforms who need 16GB of capacity at 1600MHz. The CL10 timings and 1.50V voltage match standard specifications for this generation. Builders whose motherboards require a different memory generation cannot use these modules. Systems limited to lower speeds will not run the kit at its rated 1600MHz.
The single specification that determines compatibility is the DDR3 1600 (PC3 12800) speed rating. Your motherboard and processor must support DDR3 memory at this frequency to operate the kit as intended. If the platform only accepts slower DDR3 speeds, the modules will downclock. If the platform requires a different memory type entirely, the modules will not fit or function.
| Brand | Patriot |
|---|---|
| Series | Viper 3 |
| Model | PV316G160C0K |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL10 |
| Timing | 10-10-10-27 |
| Voltage | 1.50V |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | Yes |
| Тегло на пратката | 0.12 kg |
| Размери на опаковката | 180 × 122 × 15 mm |
The Viper 3 kit uses a custom high-performance heat shield; measure your cooler clearance against the module height before installing.
Enable the XMP 1.3 profile in the BIOS after seating both 8GB DIMMs in the correct motherboard slots for dual-channel operation.
No special cooling is required beyond normal case airflow; the heat spreader handles dissipation and the modules have no user-serviceable parts to replace.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?