BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Patriot Memory
A 16 GB dual-channel DDR3 1600 kit with CL10 timing and a heat spreader
This Patriot Viper 3 kit provides 16GB of DDR3 memory across two 8GB modules. It runs at 1600MHz with a CAS latency of CL10 and timings of 10-10-10-27 at 1.50V. A custom heat shield is fitted to each module for thermal management. The kit is XMP 1.3 ready and hand-tested for stability.
The dual-channel configuration suits owners of DDR3-compatible Intel or AMD platforms who need 16GB of capacity at 1600MHz. The CL10 timings and 1.50V voltage match standard specifications for this generation. Builders whose motherboards require a different memory generation cannot use these modules. Systems limited to lower speeds will not run the kit at its rated 1600MHz.
The single specification that determines compatibility is the DDR3 1600 (PC3 12800) speed rating. Your motherboard and processor must support DDR3 memory at this frequency to operate the kit as intended. If the platform only accepts slower DDR3 speeds, the modules will downclock. If the platform requires a different memory type entirely, the modules will not fit or function.
| Brand | Patriot |
|---|---|
| Series | Viper 3 |
| Model | PV316G160C0K |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL10 |
| Timing | 10-10-10-27 |
| Voltage | 1.50V |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | Yes |
| وزن الشحنة | 0.12 kg |
| أبعاد الطرد | 180 × 122 × 15 mm |
The Viper 3 kit uses a custom high-performance heat shield; measure your cooler clearance against the module height before installing.
Enable the XMP 1.3 profile in the BIOS after seating both 8GB DIMMs in the correct motherboard slots for dual-channel operation.
No special cooling is required beyond normal case airflow; the heat spreader handles dissipation and the modules have no user-serviceable parts to replace.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟