Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Silver 3.5 inch hard drive with green label and circuit board visible

Seagate

Seagate IronWolf Pro ST14000NT001 14TB 7200 RPM 256MB SATA 3.5" internal hard drive

SKU CH-Q98P-5Q0BX MPN ST14000NT001

A 14 TB CMR drive built for 24×7 multi-bay NAS with 7200 RPM, 256 MB cache and AgileArray RAID optimisation

  • InterfaceSATA 6.0Gb/s
  • Capacity14TB
  • Recording TechnologyCMR
  • RPM7200 RPM
  • Cache256MB
  • FeaturesOptimized for NAS with AgileArray AgileArray uses dual-plane

Options 14TB

  • 14TB capacity stores massive datasets
  • 7200 RPM with 256MB cache speeds multi-user access
  • CMR technology delivers consistent 24×7 performance
  • AgileArray with RV sensors optimises RAID in multi-bay NAS
  • 550TB/year workload rating and 2.5M hours MTBF ensure enterprise reliability

Built for multi-bay NAS

The Seagate IronWolf Pro ST14000NT001 is a 14TB 3.5-inch internal hard drive designed for commercial and enterprise NAS systems. It uses conventional magnetic recording and a SATA 6.0Gb/s interface to deliver 24×7 performance in multi-user RAID environments. The 7200 RPM spindle speed and 256MB cache support fast data access for demanding network workloads.

Sustained 24×7 operation

AgileArray technology combines dual-plane balancing with time-limited error recovery to maintain consistent throughput during continuous RAID rebuilds or heavy multi-user traffic. Rotational vibration sensors further stabilise performance across multiple bays. The drive carries a 550TB per year workload rating and a 2.5M hour MTBF, reflecting its engineering for non-stop enterprise duty cycles.

Thermals and power in normal use

The 26.11mm height, 101.85mm width and 146.99mm length fit standard 3.5-inch drive bays while allowing adequate airflow in dense chassis. IronWolf Health Management monitors drive behaviour and provides prevention, intervention and recovery recommendations to keep temperatures and vibration in check. A complimentary three-year Rescue Data Recovery Services plan adds a safety net if unexpected failures occur.

Акценти

  • 14TB capacity stores massive datasets
  • 7200 RPM with 256MB cache speeds multi-user access
  • CMR technology delivers consistent 24×7 performance
  • AgileArray with RV sensors optimises RAID in multi-bay NAS
  • 550TB/year workload rating and 2.5M hours MTBF ensure enterprise reliability

Спецификации

BrandSeagate
SeriesIronWolf Pro
ModelST14000NT001
InterfaceSATA 6.0Gb/s
Capacity14TB
Recording TechnologyCMR
RPM7200 RPM
Cache256MB
FeaturesOptimized for NAS with AgileArray AgileArray uses dual-plane balancing and time-limited error recovery (TLER) to deliver best-in-class RAID performance in multi-bay systems.
Always On, Always Accessible IronWolf Pro drives are designed for 24x7 performance, allowing users to access their data anytime, anywhere.
All-CMR Portfolio All IronWolf Pro drives utilize conventional magnetic recording (CMR) technology for consistent, best-in-class NAS performance.
Up to 20TB Broad range of high-performance capacity options to deliver scalable and costefficient storage solutions.
Built Tough Ir
UsageEnterprise NAS Hard Drives
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.85mm
Length (maximum)146.99mm
Тегло на пратката0.91 kg
Размери на опаковката196 × 152 × 51 mm

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How much heat and power does the 7200 RPM IronWolf Pro generate during 24×7 operation?

The drive is rated for a 550 TB per year workload and 2.5 million hours MTBF, indicating it is built for continuous multi-bay NAS use with managed rotational vibration.

What host connection and physical bay does the 3.5-inch SATA 6.0Gb/s drive require?

It needs a standard 3.5-inch drive bay with a SATA data cable and a SATA power connector from the system or NAS enclosure.

Will the ST14000NT001 work in an older NAS that only supports drives up to 8 TB?

Compatibility depends on the NAS firmware and controller; the drive uses the standard SATA 6.0Gb/s interface but capacity support must be verified with the enclosure manufacturer.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.