Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Thermal Grizzly Hydronaut syringe with grey thermal paste inside

Thermal Grizzly

Thermal Grizzly Hydronaut TG-H-100-R thermal paste 10 ml

SKU CH-220P-Z3DZX

High-performance thermal paste with 11.8 W/mK conductivity for CPU, GPU and console cooling

  • Volume / Net Weight1.0g
  • Thermal Conductivity11.8 W/Mk
  • Specifications26 grams
  • FeaturesHydronaut can be used for overclocking due to it's excellent

Weight 26 g

  • High thermal conductivity of 11.8 W/Mk enables efficient heat transfer
  • Non-conductive formula with 0 pS/m eliminates short-circuit risk
  • Stable from -200 °C to +350 °C suits extreme cooling methods
  • Silicone-free paste resists hardening for long-term reliability
  • Easy-apply syringe ensures precise coverage on CPU, GPU and consoles

Designed for large coolers and overclocking

Hydronaut is a high-performance thermal compound built for enthusiasts using substantial air or water cooling setups. Its 11.8 W/mK conductivity supports overclocking headroom while remaining non-conductive and silicone-free. The paste suits CPUs, GPUs, consoles and laptops alike.

Stable across extreme temperatures

Rated from -200 °C to +350 °C, the compound does not harden or cure over time, preserving long-term contact between die and cold plate. Electrical conductivity is 0 pS/m, eliminating short-circuit risk on exposed components. Thermal resistance measures 0.0076 K/W for efficient heat flow.

Syringe simplifies precise application

The included 10 ml syringe dispenses the 26 g payload directly onto heatspreaders, LEDs or heat-dissipating fins without waste. Viscosity of 140-190 Pas keeps the grease in place during mounting. No separate hardener or curing step is required.

Акценти

  • High thermal conductivity of 11.8 W/Mk enables efficient heat transfer
  • Non-conductive formula with 0 pS/m eliminates short-circuit risk
  • Stable from -200 °C to +350 °C suits extreme cooling methods
  • Silicone-free paste resists hardening for long-term reliability
  • Easy-apply syringe ensures precise coverage on CPU, GPU and consoles

Спецификации

BrandThermal Grizzly
SeriesHydronaut
ModelTG-H-100-R
Part NumberTG-H-100-R
Volume / Net Weight1.0g
Thermal Conductivity11.8 W/Mk
Specifications26 grams
FeaturesHydronaut can be used for overclocking due to it's excellent thermal conductivity.

Други версии на този модел

2 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How do I apply the 10 ml syringe without trapping air bubbles?

Dispense a small dot or thin line onto the centre of the CPU or GPU die, then mount the cooler straight down so pressure spreads the paste evenly without lifting the heatsink again.

Will the 11.8 W/mK paste dry out or need replacement after a few years?

The silicone-free Hydronaut formula does not cure or harden, so it maintains its consistency and thermal performance indefinitely under normal operating temperatures.

At what temperature does the paste stop being effective during heavy loads?

Hydronaut is rated for continuous operation up to 350 °C, far above any component temperature reached in air or water-cooled systems.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.