نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Thermal Grizzly Hydronaut syringe with grey thermal paste inside

Thermal Grizzly

Thermal Grizzly Hydronaut TG-H-100-R thermal paste 10 ml

SKU CH-220P-Z3DZX

High-performance thermal paste with 11.8 W/mK conductivity for CPU, GPU and console cooling

  • Volume / Net Weight1.0g
  • Thermal Conductivity11.8 W/Mk
  • Specifications26 grams
  • FeaturesHydronaut can be used for overclocking due to it's excellent

Weight 26 g

  • High thermal conductivity of 11.8 W/Mk enables efficient heat transfer
  • Non-conductive formula with 0 pS/m eliminates short-circuit risk
  • Stable from -200 °C to +350 °C suits extreme cooling methods
  • Silicone-free paste resists hardening for long-term reliability
  • Easy-apply syringe ensures precise coverage on CPU, GPU and consoles

Designed for large coolers and overclocking

Hydronaut is a high-performance thermal compound built for enthusiasts using substantial air or water cooling setups. Its 11.8 W/mK conductivity supports overclocking headroom while remaining non-conductive and silicone-free. The paste suits CPUs, GPUs, consoles and laptops alike.

Stable across extreme temperatures

Rated from -200 °C to +350 °C, the compound does not harden or cure over time, preserving long-term contact between die and cold plate. Electrical conductivity is 0 pS/m, eliminating short-circuit risk on exposed components. Thermal resistance measures 0.0076 K/W for efficient heat flow.

Syringe simplifies precise application

The included 10 ml syringe dispenses the 26 g payload directly onto heatspreaders, LEDs or heat-dissipating fins without waste. Viscosity of 140-190 Pas keeps the grease in place during mounting. No separate hardener or curing step is required.

أبرز المميزات

  • High thermal conductivity of 11.8 W/Mk enables efficient heat transfer
  • Non-conductive formula with 0 pS/m eliminates short-circuit risk
  • Stable from -200 °C to +350 °C suits extreme cooling methods
  • Silicone-free paste resists hardening for long-term reliability
  • Easy-apply syringe ensures precise coverage on CPU, GPU and consoles

المواصفات

BrandThermal Grizzly
SeriesHydronaut
ModelTG-H-100-R
Part NumberTG-H-100-R
Volume / Net Weight1.0g
Thermal Conductivity11.8 W/Mk
Specifications26 grams
FeaturesHydronaut can be used for overclocking due to it's excellent thermal conductivity.

إصدارات أخرى من هذا الطراز

2 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I apply the 10 ml syringe without trapping air bubbles?

Dispense a small dot or thin line onto the centre of the CPU or GPU die, then mount the cooler straight down so pressure spreads the paste evenly without lifting the heatsink again.

Will the 11.8 W/mK paste dry out or need replacement after a few years?

The silicone-free Hydronaut formula does not cure or harden, so it maintains its consistency and thermal performance indefinitely under normal operating temperatures.

At what temperature does the paste stop being effective during heavy loads?

Hydronaut is rated for continuous operation up to 350 °C, far above any component temperature reached in air or water-cooled systems.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.