Thermaltake
Thermaltake CT120 EX ARGB Sync 120mm White 3-Fan Pack CL-F190-PL12SW-A
- Case Fan
- 120mm
43,99 щ.д.
0.00056684BTC
В наличност
Thermaltake
Thermaltake CT140 EX ARGB Sync 3-Fan Pack 140mm CL-F182-PL14SW-A
Three 140 mm magnetic fans deliver 90.3 CFM airflow at 30.7 dB-A with 16.8 million-colour ARGB sync
- Fan Counts3 Fans
- Fan ControllerNo Controller
- TypeCase Fan
- Fan Size140mm
- Fan Thickness25mm
- Bearing TypeHydraulic
Fan Size 140mm
- 140mm
- 120mm
- Magnetic daisy-chaining with MagForce 2.0 for faster builds
- 9 addressable LEDs sync via 5V motherboard header for 16.8 million colours
- Hydraulic bearing runs at 30.7 dB-A for quiet cooling
- PWM 500–1800 RPM delivers 90.3 CFM airflow
- Anti-vibration mounts reduce resonance for stable operation
Three-Fan Pack for 140mm Mounts
This pack contains three 140mm case fans designed for chassis or radiator mounting. Each unit uses a hydraulic bearing and a 4-pin PWM connector for speed control between 500 and 1800 RPM. A separate 3-pin 5V ARGB header drives nine addressable LEDs per fan. The black frames measure 140 by 140 by 25 millimetres.
Magnetic Daisy-Chain Installation
MagForce 2.0 uses larger pogo-pin pads so fans snap together magnetically, letting a single cable run carry both power and ARGB signals for the whole chain. The anti-vibration mounts are embedded in the frame corners. The only common issue is aligning the magnetic contacts cleanly; if a pad sits slightly off-centre the link will not engage until reseated.
5V ARGB Ecosystem Limits
Lighting control depends entirely on a motherboard 5V ARGB header and its companion software; no standalone controller is included. The header’s current rating caps how many fans can be driven on one channel, so very long chains may need a powered splitter. PWM speed range tops out at 1800 RPM, delivering 90.3 CFM airflow and 3.07 mm-H2O static pressure at 30.7 dB-A.
Акценти
- Magnetic daisy-chaining with MagForce 2.0 for faster builds
- 9 addressable LEDs sync via 5V motherboard header for 16.8 million colours
- Hydraulic bearing runs at 30.7 dB-A for quiet cooling
- PWM 500–1800 RPM delivers 90.3 CFM airflow
- Anti-vibration mounts reduce resonance for stable operation
Спецификации
| Brand | Thermaltake |
|---|---|
| Series | CT140 EX ARGB Sync |
| Model | CL-F182-PL14SW-A |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | PWM 500~1800 R.P.M |
| Air Flow | 90.3 CFM |
| Air Pressure | 3.07 mm-H2O |
| Noise Level | 30.7 dB-A |
| Power Connector | 2510 - 4 PIN PWM 5V ARGB header - 3 PIN |
| Color | Black |
| LED | ARGB |
| Dimensions | 140 x 140 x 25 mm |
| Package Contents | Fan x 3 Cable x 3 |
| Тегло на пратката | 0.91 kg |
| Размери на опаковката | 165 × 152 × 89 mm |
Други версии на този модел
1 още от същата серия
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Въпроси за този артикул
How can I verify the fans are running at the correct speed after installation?
Use motherboard monitoring software to confirm each fan reports between 500 and 1800 RPM under PWM control.
What comes in the box and which cables must I provide?
The pack includes three fans and three cables; you will need a motherboard with a 2510 4-pin PWM header and a 5V 3-pin ARGB header for power and lighting.
Which version of the CT140 EX ARGB Sync should I choose for a 140 mm radiator?
This CL-F182-PL14SW-A pack contains three 140 mm fans with 25 mm thickness, matching standard 140 mm radiator mounts.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 щ.д.
0.00001057BTC
В наличност