Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Three black 140mm square fans with ARGB lighting and magnetic connectors in a pack

Thermaltake

Thermaltake CT140 EX ARGB Sync 3-Fan Pack 140mm CL-F182-PL14SW-A

SKU CH-YQCW-X46R3 MPN CL-F182-PL14SW-A

Three 140 mm magnetic fans deliver 90.3 CFM airflow at 30.7 dB-A with 16.8 million-colour ARGB sync

  • Fan Counts3 Fans
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic

Fan Size 140mm

  • 140mm
  • 120mm

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Magnetic daisy-chaining with MagForce 2.0 for faster builds
  • 9 addressable LEDs sync via 5V motherboard header for 16.8 million colours
  • Hydraulic bearing runs at 30.7 dB-A for quiet cooling
  • PWM 500–1800 RPM delivers 90.3 CFM airflow
  • Anti-vibration mounts reduce resonance for stable operation

Three-Fan Pack for 140mm Mounts

This pack contains three 140mm case fans designed for chassis or radiator mounting. Each unit uses a hydraulic bearing and a 4-pin PWM connector for speed control between 500 and 1800 RPM. A separate 3-pin 5V ARGB header drives nine addressable LEDs per fan. The black frames measure 140 by 140 by 25 millimetres.

Magnetic Daisy-Chain Installation

MagForce 2.0 uses larger pogo-pin pads so fans snap together magnetically, letting a single cable run carry both power and ARGB signals for the whole chain. The anti-vibration mounts are embedded in the frame corners. The only common issue is aligning the magnetic contacts cleanly; if a pad sits slightly off-centre the link will not engage until reseated.

5V ARGB Ecosystem Limits

Lighting control depends entirely on a motherboard 5V ARGB header and its companion software; no standalone controller is included. The header’s current rating caps how many fans can be driven on one channel, so very long chains may need a powered splitter. PWM speed range tops out at 1800 RPM, delivering 90.3 CFM airflow and 3.07 mm-H2O static pressure at 30.7 dB-A.

Přednosti

  • Magnetic daisy-chaining with MagForce 2.0 for faster builds
  • 9 addressable LEDs sync via 5V motherboard header for 16.8 million colours
  • Hydraulic bearing runs at 30.7 dB-A for quiet cooling
  • PWM 500–1800 RPM delivers 90.3 CFM airflow
  • Anti-vibration mounts reduce resonance for stable operation

Specifikace

BrandThermaltake
SeriesCT140 EX ARGB Sync
ModelCL-F182-PL14SW-A
Fan Counts3 Fans
Fan ControllerNo Controller
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPMPWM 500~1800 R.P.M
Air Flow90.3 CFM
Air Pressure3.07 mm-H2O
Noise Level30.7 dB-A
Power Connector2510 - 4 PIN PWM
5V ARGB header - 3 PIN
ColorBlack
LEDARGB
Dimensions140 x 140 x 25 mm
Package ContentsFan x 3
Cable x 3
Přepravní hmotnost0.91 kg
Rozměry balení165 × 152 × 89 mm

Otázky k tomuto produktu

How can I verify the fans are running at the correct speed after installation?

Use motherboard monitoring software to confirm each fan reports between 500 and 1800 RPM under PWM control.

What comes in the box and which cables must I provide?

The pack includes three fans and three cables; you will need a motherboard with a 2510 4-pin PWM header and a 5V 3-pin ARGB header for power and lighting.

Which version of the CT140 EX ARGB Sync should I choose for a 140 mm radiator?

This CL-F182-PL14SW-A pack contains three 140 mm fans with 25 mm thickness, matching standard 140 mm radiator mounts.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.