NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Thermaltake
ATX 3.1 compliant 1000 W unit with native 12V-2x6 GPU power, 80 PLUS Platinum efficiency at 115 V, full modular flat cables, Japanese 105 °C capacitors and a 135 mm hydraulic bearing fan
This fully modular unit delivers 1000 W continuous output at 40 °C and meets 80 PLUS Platinum efficiency at 115 V input. It is built for builders who need a compact, high-efficiency supply that supports the latest ATX 3.1 standard and native PCIe 5.1 12V-2x6 connections for modern graphics cards. The 135 mm hydraulic bearing fan and 100 % Japanese 105 °C capacitors provide quiet operation and long-term durability under heavy loads.
The flat etched cable set is fully modular, so you connect only the leads your build requires, improving airflow and cable routing in tight cases. Dual-colour H++ connectors show a matcha indicator that disappears when the plug is fully seated, reducing the risk of loose power connections. Ensure the 12V-2x6 cable is routed without sharp bends and that the fan intake remains unobstructed; the most frequent issue is restricted airflow in smaller chassis.
Verify that your case can accommodate a 140 mm deep power supply and that the 135 mm fan has clearance for intake air. Confirm your motherboard and graphics card require the native 12V-2x6 connector; older GPUs using traditional 8-pin PCIe plugs will need the appropriate modular cables from the set. Check that your mains supply falls within the 100-240 V, 47-63 Hz range and that the 15 A maximum input current is supported by your circuit.
| Brand | Thermaltake |
|---|---|
| Model | PS-TPP-1000FNFAPU-1 |
| Color | Black |
| Maximum Power | 1000 W |
| Fans | 135mm FDB fan |
| PFC | Active |
| Modular | Full Modular |
| Efficiency | Meet 80 PLUS Platinum at 115Vac input. |
| Input Voltage | 100-240V~ |
| Input Frequency Range | 47 - 63 Hz |
| Input Current | 15.0A Max. |
| MTBF | 100,000 hrs minimum |
| Power Good Signal | 100-150 msec |
| Dimensions | 5.9 in x 5.5 in x 3.4 in |
| Weight | 4lbs |
| Тегло на пратката | 3.45 kg |
| Размери на опаковката | 305 × 216 × 122 mm |
The unit sends a power-good signal within 100 to 150 milliseconds after switch-on; a stable system boot and no protection triggers indicate normal operation.
The package includes a full modular set with flat etched cables and a native 12V-2x6 GPU connector; only the AC power cord is typically supplied separately.
The 1000 W model provides a strong single +12V rail, ATX 3.1 compliance and up to 600 W through the 12V-2x6 connector for modern GPUs.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?