BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Thermaltake
White dual-channel DDR4 kit with 16 addressable RGB LEDs, XMP 2.0 at 4600 MHz CL19 and 10-layer PCB for stability
This 16GB kit uses two 8GB modules rated at DDR4 4600 with a CAS latency of CL19 and a voltage of 1.50V. It targets builders who want fast, illuminated memory on those specific platforms. The white heatspreaders and 16 addressable RGB LEDs suit colour-themed systems that sync with 5V motherboard headers, Alexa or Razer Chroma.
The single specification that determines suitability is the DDR4 4600 rating combined with CL19 timing at 1.50V. Buyers must verify that their CPU and motherboard can run this frequency at the rated voltage without manual tuning. If the platform tops out at a lower data rate or cannot supply the required voltage, the modules will fall back to a slower JEDEC profile.
Sixteen gigabytes is enough for current games, streaming and typical productivity workloads with headroom for background tasks. Heavy content creation, virtual machines or large datasets will exceed this capacity and require a larger kit. The XMP 2.0 profile offers a one-click path to the rated speed on supported boards, while the 10-layer PCB and 2oz copper help stability when pushing the frequency.
| Brand | Thermaltake |
|---|---|
| Model | TOUGHRAM XG RGB |
| Part Number | RG06D408GX2-4600C19B |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 4600 (PC4 36800) |
| CAS Latency | CL19 |
| Voltage | 1.50V |
| BIOS/Performance Profile | XMP 2.0 Ready |
| Color | White |
| Recommend Use | AMD B550 / AMD X570 / Intel Z490 / Intel Z590 / Intel Z690 |
| LED Color | RGB |
The modules run at DDR4 4600 (PC4 36800) when the XMP 2.0 profile is enabled in the BIOS, otherwise they fall back to the standard JEDEC speed.
XMP 2.0 stores the 4600MHz CL19 1.50V profile so the board can apply it with one setting; without it the kit operates at the lower default DDR4 speed.
The 10-layer PCB with 2oz copper and the premium heat-spreader design fit standard DIMM slots; check your CPU cooler height for any overlap.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?