BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Thermaltake
White dual-channel DDR4 kit with 16 addressable RGB LEDs, XMP 2.0 at 4600 MHz CL19 and 10-layer PCB for stability
This 16GB kit uses two 8GB modules rated at DDR4 4600 with a CAS latency of CL19 and a voltage of 1.50V. It targets builders who want fast, illuminated memory on those specific platforms. The white heatspreaders and 16 addressable RGB LEDs suit colour-themed systems that sync with 5V motherboard headers, Alexa or Razer Chroma.
The single specification that determines suitability is the DDR4 4600 rating combined with CL19 timing at 1.50V. Buyers must verify that their CPU and motherboard can run this frequency at the rated voltage without manual tuning. If the platform tops out at a lower data rate or cannot supply the required voltage, the modules will fall back to a slower JEDEC profile.
Sixteen gigabytes is enough for current games, streaming and typical productivity workloads with headroom for background tasks. Heavy content creation, virtual machines or large datasets will exceed this capacity and require a larger kit. The XMP 2.0 profile offers a one-click path to the rated speed on supported boards, while the 10-layer PCB and 2oz copper help stability when pushing the frequency.
| Brand | Thermaltake |
|---|---|
| Model | TOUGHRAM XG RGB |
| Part Number | RG06D408GX2-4600C19B |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 4600 (PC4 36800) |
| CAS Latency | CL19 |
| Voltage | 1.50V |
| BIOS/Performance Profile | XMP 2.0 Ready |
| Color | White |
| Recommend Use | AMD B550 / AMD X570 / Intel Z490 / Intel Z590 / Intel Z690 |
| LED Color | RGB |
The modules run at DDR4 4600 (PC4 36800) when the XMP 2.0 profile is enabled in the BIOS, otherwise they fall back to the standard JEDEC speed.
XMP 2.0 stores the 4600MHz CL19 1.50V profile so the board can apply it with one setting; without it the kit operates at the lower default DDR4 speed.
The 10-layer PCB with 2oz copper and the premium heat-spreader design fit standard DIMM slots; check your CPU cooler height for any overlap.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?