Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green circuit board with ten SATA ports and standard bracket

TROPRO

TROPRO 10-Port SATA 3.0 Expansion Card with Standard Bracket

SKU CH-HF9N-DTT3C

Adds ten SATA 3.0 ports via a PCIe x4 slot using JMB575 and JMB1064 chipsets for 6 Gbps speeds and includes cables

  • TypePCI Express to USB Card
  • External USB PortsUSB 3.0
  • Connect 10 drives at once with 10 SATA 3.0 ports
  • Reach 6Gbps transfer speeds per port via SATA 3.0
  • Stable multi-drive operation using JMB575+JMB1064 chipset
  • Fits standard chassis with included full-height bracket
  • Works in PCIe x4, x8 or x16 slots

10-port SATA 3.0 controller card

This TROPRO expansion card adds ten SATA 3.0 ports through a PCIe x4 slot, using a JMB575 plus JMB1064 or JMB1166 chipset for 6 Gbps transfer rates. It ships with ten SATA data cables and two SATA power splitter cables, so no extra accessories are required. The standard-profile bracket fits typical desktop and server chassis.

Suits builders adding many drives; not for slim PCs

The card targets users who need to connect multiple hard drives or SSDs simultaneously in a standard-size tower or rack-mount system. Hot-plug and hot-swap are supported under Windows 10, 8, 7 and Linux without extra driver installation. Slim or low-profile cases cannot accommodate the full-height bracket, so those builders must look elsewhere.

PCIe x4 slot required for full bandwidth

The controller operates over a PCIe 2.0 x1 link but is physically an x4 card that also seats in x8 or x16 slots. A motherboard must provide at least one PCIe x4 or larger slot to use the card at its intended throughput. Booting from the card is possible in non-RAID mode, though the manufacturer advises against using it as a primary system drive.

Акценти

  • Connect 10 drives at once with 10 SATA 3.0 ports
  • Reach 6Gbps transfer speeds per port via SATA 3.0
  • Stable multi-drive operation using JMB575+JMB1064 chipset
  • Fits standard chassis with included full-height bracket
  • Works in PCIe x4, x8 or x16 slots

Спецификации

BrandMengChu
SeriesPCIe SATA Card 10 Port with 10 SATA Cables
TypePCI Express to USB Card
External USB PortsUSB 3.0

Въпроси за този артикул

Will the 10 SATA 3.0 ports work alongside my existing PCIe x1 slot?

The card uses a PCIe Gen 2 x1 interface and fits into x4, x8 or x16 slots, so it will operate in your existing x1 slot while providing ten 6Gbps SATA connections.

How can I verify the JMB575+JMB1064 chipset is running at full 6Gbps speed after installation?

Check each connected drive in Device Manager or with a benchmark tool; all ten ports should report SATA 3.0 6Gbps link speed when the chipset is functioning correctly.

Do the 10 SATA cables and 2 SATA power splitter cables included cover every drive I attach?

Yes, the package supplies ten data cables and two power splitter cables, giving you a complete kit for all ten SATA devices without extra purchases.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.