Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with ten SATA ports and standard bracket

TROPRO

TROPRO 10-Port SATA 3.0 Expansion Card with Standard Bracket

SKU CH-HF9N-DTT3C

Adds ten SATA 3.0 ports via a PCIe x4 slot using JMB575 and JMB1064 chipsets for 6 Gbps speeds and includes cables

  • TypePCI Express to USB Card
  • External USB PortsUSB 3.0
  • Connect 10 drives at once with 10 SATA 3.0 ports
  • Reach 6Gbps transfer speeds per port via SATA 3.0
  • Stable multi-drive operation using JMB575+JMB1064 chipset
  • Fits standard chassis with included full-height bracket
  • Works in PCIe x4, x8 or x16 slots

10-port SATA 3.0 controller card

This TROPRO expansion card adds ten SATA 3.0 ports through a PCIe x4 slot, using a JMB575 plus JMB1064 or JMB1166 chipset for 6 Gbps transfer rates. It ships with ten SATA data cables and two SATA power splitter cables, so no extra accessories are required. The standard-profile bracket fits typical desktop and server chassis.

Suits builders adding many drives; not for slim PCs

The card targets users who need to connect multiple hard drives or SSDs simultaneously in a standard-size tower or rack-mount system. Hot-plug and hot-swap are supported under Windows 10, 8, 7 and Linux without extra driver installation. Slim or low-profile cases cannot accommodate the full-height bracket, so those builders must look elsewhere.

PCIe x4 slot required for full bandwidth

The controller operates over a PCIe 2.0 x1 link but is physically an x4 card that also seats in x8 or x16 slots. A motherboard must provide at least one PCIe x4 or larger slot to use the card at its intended throughput. Booting from the card is possible in non-RAID mode, though the manufacturer advises against using it as a primary system drive.

Prednosti

  • Connect 10 drives at once with 10 SATA 3.0 ports
  • Reach 6Gbps transfer speeds per port via SATA 3.0
  • Stable multi-drive operation using JMB575+JMB1064 chipset
  • Fits standard chassis with included full-height bracket
  • Works in PCIe x4, x8 or x16 slots

Špecifikácie

BrandMengChu
SeriesPCIe SATA Card 10 Port with 10 SATA Cables
TypePCI Express to USB Card
External USB PortsUSB 3.0

Otázky k tomuto produktu

Will the 10 SATA 3.0 ports work alongside my existing PCIe x1 slot?

The card uses a PCIe Gen 2 x1 interface and fits into x4, x8 or x16 slots, so it will operate in your existing x1 slot while providing ten 6Gbps SATA connections.

How can I verify the JMB575+JMB1064 chipset is running at full 6Gbps speed after installation?

Check each connected drive in Device Manager or with a benchmark tool; all ten ports should report SATA 3.0 6Gbps link speed when the chipset is functioning correctly.

Do the 10 SATA cables and 2 SATA power splitter cables included cover every drive I attach?

Yes, the package supplies ten data cables and two power splitter cables, giving you a complete kit for all ten SATA devices without extra purchases.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.