XPG
XPG ASX6000LNP-256GT-C SX6000 Lite 256GB internal SSD
- Internal Solid Stat…
- Consumer
36,99 щ.д.
0.00046432BTC
В наличност
XPG
XPG SX6000 Lite ASX6000LNP-512GT-C 512GB internal SSD
512 GB M.2 2280 PCIe 3.0 x4 SSD delivering up to 1800 MB/s read and 1200 MB/s write with 240 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity512GB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
Options 512GB Lite
- 512GB Lite
- 256GB Lite
- Fast boot and app loads with up to 1800 MB/s sequential read
- Smooth multitasking backed by up to 1200 MB/s sequential write
- Responsive random access at up to 180,000 read IOPS and 200,000 write IOPS
- Long-term reliability with 240 TBW endurance and 1,800,000-hour MTBF
- Low power draw of 0.33 W active and 0.14 W idle extends laptop battery life
Capacity and interface
The XPG SX6000 Lite is a 512GB internal solid state drive using the M.2 2280 form factor and a PCI-Express 3.0 x4 connection. It supports the NVMe 1.3 protocol and uses 3D NAND flash with advanced LDPC ECC, HMB and SLC caching to deliver sequential reads up to 1800 MBps and writes up to 1200 MBps. Endurance is rated at 240TB written with a 1.8 million hour MTBF.
Who this suits and who should look elsewhere
This drive suits users upgrading a laptop, ultrabook or desktop that has an M.2 slot wired for PCI-Express 3.0 x4 and wants a noticeable speed lift over a SATA SSD. Systems limited to SATA-only M.2 slots or older PCIe 2.0 lanes will not realise the quoted throughput, so a SATA M.2 drive may be a better match.
What to check before ordering
Verify that your motherboard or laptop provides an M.2 2280 slot keyed for PCI-Express 3.0 x4 NVMe operation and that the BIOS recognises NVMe boot devices. Confirm the operating temperature range of 0°C to 70°C fits your chassis airflow, and ensure the power budget can accommodate 0.33W active draw.
Акценти
- Fast boot and app loads with up to 1800 MB/s sequential read
- Smooth multitasking backed by up to 1200 MB/s sequential write
- Responsive random access at up to 180,000 read IOPS and 200,000 write IOPS
- Long-term reliability with 240 TBW endurance and 1,800,000-hour MTBF
- Low power draw of 0.33 W active and 0.14 W idle extends laptop battery life
Спецификации
| Brand | XPG |
|---|---|
| Series | SX6000 Lite |
| Model | ASX6000LNP-512GT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 1800 MBps |
| Max Sequential Write | Up to 1200 MBps |
| 4KB Random Read | Up to 180,000 IOPS |
| 4KB Random Write | Up to 200,000 IOPS |
| Terabytes Written (TBW) | 240TB |
| MTBF | 1,800,000 hours |
| Features | TBW: 240TB NVMe 1.3 support 3D NAND Flash for higher capacity and durability Advanced LDPC ECC Technology HMB (Host Memory Buffer) and SLC Caching Compact M.2 2280 form factor - ideal for high-end desktops, notebooks and Ultrabooks |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G / 0.5 ms |
| Height | 2.15mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8.00g |
| Тегло на пратката | 0.03 kg |
| Размери на опаковката | 132 × 102 × 18 mm |
Други версии на този модел
1 още от същата серия
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Въпроси за този артикул
Does my motherboard need an M.2 2280 slot that runs PCI-Express 3.0 x4 for this drive to work?
Yes, the drive uses the M.2 2280 form factor and requires a PCI-Express 3.0 x4 connection to operate at its rated speeds of up to 1800 MBps read and 1200 MBps write.
Can I keep my existing SATA SSD and add this drive as a secondary boot or storage device?
Yes, the drive installs in an M.2 slot while your SATA SSD stays connected to its own port; the system will see both drives independently.
How can I verify the drive is delivering its rated 1800 MBps read and 1200 MBps write performance after installation?
Run a sequential benchmark such as CrystalDiskMark; results near 1800 MBps read and 1200 MBps write confirm the PCI-Express 3.0 x4 link and NVMe 1.3 support are active.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
