XPG
XPG SX8100 4TB M.2 2280 internal SSD
A 4TB M.2 2280 internal SSD using PCIe 3.0 x4 and 3D NAND for up to 3500 MB/s read and 3000 MB/s write with 2560 TBW endurance
- Device TypeInternal (Desktop)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity4TB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
Options 4TB
- 4TB
- 2TB
Зачертаните версии съществуват, но не се предлагат тук.
- Sequential reads up to 3500 MB/s for fast system responsiveness
- Sequential writes up to 3000 MB/s for quick file saves and installs
- Random reads up to 290000 IOPS for snappy multitasking and game loads
- 2560 TB written endurance with 2000000 hour MTBF for long-term reliability
- Low active power draw of 0.33 W and idle 0.14 W for cooler operation
XPG SX8100 4TB M.2 2280 SSD
The XPG SX8100 is a 4TB internal solid-state drive built for desktop PCs. It uses the M.2 2280 form factor and a PCI-Express 3.0 x4 interface with 3D NAND flash. Sequential speeds reach up to 3500 MB/s read and 3000 MB/s write. It is aimed at DIY enthusiasts, overclockers and graphics professionals who need large, fast storage.
Suits heavy workloads, not Gen4 slots
This drive suits users moving large project files, game libraries or video footage who want Gen3 endpoint performance. Random reads hit 290,000 IOPS and writes 240,000 IOPS, while SLC caching and a DRAM buffer smooth burst workloads. Endurance is rated at 2560 TBW with a 2,000,000-hour MTBF. Buyers whose motherboards only support PCIe 4.0 or 5.0 NVMe speeds should consider a newer-generation drive instead.
PCIe 3.0 x4 interface decides fit
The single specification that determines compatibility is the PCI-Express 3.0 x4 interface. Your motherboard must provide an M.2 slot wired for PCIe 3.0 (or backward-compatible 4.0/5.0) to run this SSD at its rated 3500/3000 MB/s. Without that link the drive will not operate at advertised throughput, so verify the slot generation before purchase.
Акценти
- Sequential reads up to 3500 MB/s for fast system responsiveness
- Sequential writes up to 3000 MB/s for quick file saves and installs
- Random reads up to 290000 IOPS for snappy multitasking and game loads
- 2560 TB written endurance with 2000000 hour MTBF for long-term reliability
- Low active power draw of 0.33 W and idle 0.14 W for cooler operation
Спецификации
| Brand | XPG |
|---|---|
| Series | SX8100 |
| Model | ASX8100NP-4TT-C |
| Device Type | Internal (Desktop) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | 3000MB/s |
| 4KB Random Read | Up to 290,000 IOPS |
| 4KB Random Write | Up to 240,000 IOPS |
| Terabytes Written (TBW) | 2560TB |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 0.640 |
| Width | 4.000 |
| Depth | 5.000 |
| Weight | 0.07 |
Въпроси за този артикул
What M.2 slot key and PCIe generation does my motherboard need for the SX8100 4TB?
The SX8100 4TB uses an M.2 2280 form factor with a PCIe 3.0 x4 NVMe interface, so your motherboard must provide an M-keyed M.2 slot wired for PCIe 3.0 x4 or higher.
Will the SX8100 4TB work in a system that only has PCIe 2.0 M.2 slots?
Yes, the drive is backward compatible and will operate in a PCIe 2.0 x4 slot, but sequential speeds will be limited to the 2.0 bandwidth ceiling instead of the rated 3500 MB/s read and 3000 MB/s write.
How can I verify the SX8100 4TB is delivering its rated performance after installation?
Run a sequential benchmark such as CrystalDiskMark; you should see reads approaching 3500 MB/s and writes near 3000 MB/s on a PCIe 3.0 x4 link, with 4K random results around 290,000 IOPS read and 240,000 IOPS write.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
