A-Tech
A-Tech 4GB DDR3 1333MHz CL9 1.5V 204-Pin SODIMM Laptop RAM
4GB DDR3 1333MHz CL9 SODIMM laptop memory upgrade compatible with HP part numbers 536726-651, 536726-952 and 599092-001
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- 4GB capacity adds responsive multitasking headroom
- DDR3 1333 MHz speed accelerates everyday workloads
- 204-pin SO-DIMM fits standard laptop slots
- 5V standard voltage ensures broad compatibility
- Major-brand chips tested for reliable operation
Compatible HP Laptop Upgrade
This A-Tech module is a 4GB DDR3 1333MHz SODIMM built to replace HP part numbers 536726-651, 536726-952, 536726-953, 572294-D88, 578178-001, 599092-001 and 599092-002. It runs at CL9 latency on standard 1.5V power and uses unbuffered, non-ECC chips.
Not for ECC or Higher-Speed Needs
Buyers whose systems require error-correcting code memory or registered modules cannot use this stick. Laptops limited to lower DDR3 speeds or those needing more than a single 4GB module should look at other options.
204-Pin DDR3 SO-DIMM Form Factor
The 204-pin SO-DIMM edge connector is the single specification that determines physical fit. Only systems with DDR3 SO-DIMM slots accepting PC3-10600 modules at 1.5V can install this memory.
Fordele
- 4GB capacity adds responsive multitasking headroom
- DDR3 1333 MHz speed accelerates everyday workloads
- 204-pin SO-DIMM fits standard laptop slots
- 5V standard voltage ensures broad compatibility
- Major-brand chips tested for reliable operation
Specifikationer
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Spørgsmål om denne vare
Will this 204-Pin DDR3 1333MHz CL9 1.5V SODIMM run alongside the existing HP 536726-651 module in my laptop?
Yes, this module matches the HP 536726-651 specifications: DDR3 1333 (PC3-10600), CL9, 1.5V, non-ECC, unbuffered, 204-pin SODIMM. Mixed speeds default to the slowest module.
How can I confirm the 4GB DDR3 1333MHz stick is detected at the correct speed after installation?
Open Task Manager → Performance → Memory and verify 4GB shows at 1333 MHz; alternatively run CPU-Z and check the SPD tab reads PC3-10600 CL9.
Does the package contain only the 1x 4GB 204-Pin SODIMM or are tools and adapters included?
Only the 1x 4GB DDR3 1333MHz CL9 1.5V 204-Pin SODIMM is supplied; no screwdrivers, anti-static strap or adapter brackets are included.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



