Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green PCB PCIe x1 card with silver bracket and black SC fiber port

Allied Telesis

Allied Telesis AT-2711FX/ST 100 Mbps PCIe fiber network expansion card

SKU CH-PDCK-H8K3H MPN AT-2711FX/ST

Adds a 100 Mbps SC fibre port via PCIe x1, with Wake-on-LAN and low power draw

  • Speed100 Mbps
  • InterfacePCI Express x1
  • Wake On LANYes
  • Humidity0 - 90%
  • DimensionsWidth: 69 mm Depth: 121 mm Weight: 50 g
  • Weight.5

Class 10/100 PCI

  • 10/100
  • 10/100 PCI
  • Gigabit PCI-E

De overstregede versioner findes, men er ikke på lager her.

  • 100 Mbps fiber connectivity via PCI Express x1 interface
  • Wake-on-LAN support enables remote power management
  • Compact 69 mm by 121 mm low-profile form factor
  • Lightweight 50 g design reduces system load
  • Operates reliably in 0 to 90% humidity environments

100 Mbps Fiber PCIe Network Card

The Allied Telesis AT-2711FX/ST adds a single 100 Mbps fiber uplink to any desktop or server with a free PCI Express x1 slot. It targets administrators who need to extend legacy Fast Ethernet fiber links without replacing existing cabling or switches. The half-height bracket fits standard and low-profile chassis alike.

Capacity And Headroom

The card delivers a sustained 100 Mbps over duplex SC fiber, which is sufficient for basic segmentation, management VLANs or bridging older equipment. It will saturate once traffic exceeds the 100 Mbps line rate, so aggregate throughput above that level requires a faster uplink or link aggregation on the switch side.

Upgrade Path From PCI Fiber Adapters

This model replaces the PCI-based AT-2701FX, letting sites move to PCIe motherboards while keeping the same 100 Mbps fiber infrastructure. The jump is worth it when legacy PCI slots are no longer available or when lower power draw and Wake-on-LAN support are required for modern power-management policies.

Fordele

  • 100 Mbps fiber connectivity via PCI Express x1 interface
  • Wake-on-LAN support enables remote power management
  • Compact 69 mm by 121 mm low-profile form factor
  • Lightweight 50 g design reduces system load
  • Operates reliably in 0 to 90% humidity environments

Specifikationer

BrandAllied Telesis
ModelAT-2711FX/ST
Speed100 Mbps
InterfacePCI Express x1
Wake On LANYes
Humidity0 - 90%
DimensionsWidth: 69 mm Depth: 121 mm Weight: 50 g
Weight.5
Class10/100 PCI

Spørgsmål om denne vare

Will the AT-2711FX/ST card fit in an older PCI slot or does it require PCI Express?

The card uses a PCI Express x1 interface so it needs a PCIe slot; it will not work in a legacy PCI slot.

How can I verify the AT-2711FX/ST is operating correctly after installation?

Use the supplied diagnostics and configuration software suite to run adapter tests and confirm the 100 Mbps fiber link is active.

Does the AT-2711FX/ST include the fiber patch cable or must I buy it separately?

The card provides an SC fiber port; any SC-terminated multimode patch cable must be purchased separately.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.