Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Red UV-reactive PVC tubing coil, 10 mm inner diameter, 13 mm outer diameter, 3 metre length

Alphacool

Alphacool AlphaTube HF Tubing UV Red 10mm ID 13mm OD 3m

SKU CH-FP4Y-XHFB6

Flexible PVC tubing with 10 mm inner and 13 mm outer diameter, 3 m length, UV-red colour, rated to 80 °C and 18 bar burst pressure

  • TypeTubing

Color Red

  • UV-reactive red tubing highlights your loop
  • 10 mm inner diameter fits standard 3/8" fittings
  • 13 mm outer diameter keeps walls thin for tight bends
  • PVC rated 65-70 Shore A resists kinking down to -10 °C
  • 3 metre roll covers most single-loop builds

UV‑Active Flexible Tubing

Alphacool AlphaTube HF is a PVC water‑cooling hose with a 10 mm inner diameter and 13 mm outer diameter. The UV‑Red finish glows under blacklight for a striking loop aesthetic. Supplied in a three‑metre length, it suits custom open‑loop builds. The material operates from minus ten to eighty degrees Celsius.

Build Integration

The tubing connects pump, radiator, reservoir and blocks without proprietary fittings. Its 65‑70 Shore A hardness gives enough rigidity to resist kinking on tight bends while remaining pliable for easy routing. Standard 10 mm ID compression or barbed fittings secure each joint. No adhesives or special tools are required for assembly.

Capacity And Limits

Three metres provides ample length for most mid‑tower loops with multiple components. The hose withstands a working pressure of three bar and a burst pressure of eighteen bar, giving headroom for high‑flow pumps. It is not suited for runs exceeding the supplied length or for systems demanding a larger inner diameter.

Fordele

  • UV-reactive red tubing highlights your loop
  • 10 mm inner diameter fits standard 3/8" fittings
  • 13 mm outer diameter keeps walls thin for tight bends
  • PVC rated 65-70 Shore A resists kinking down to -10 °C
  • 3 metre roll covers most single-loop builds

Specifikationer

TypeTubing

Andre versioner af denne model

4 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How does the 10 mm inner diameter affect flow restriction during sustained high-flow operation?

The 10 mm bore keeps flow restriction low for typical D5 or DDC pumps, allowing full loop throughput without choking the pump at its rated head pressure.

Does the PVC material soften or kink when the coolant reaches the 80 °C working limit all day?

At 80 °C the tubing remains stable thanks to its 65-70 A-Shore hardness, resisting kinks and retaining shape even during continuous high-temperature circulation.

Which fittings are required to seal the 13 mm outer diameter securely?

Use 13 mm OD compression or barb fittings matched to 10 mm ID; standard G1/4 thread fittings for 13/10 mm tubing will seal the AlphaTube HF without leaks.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.