Axiom
Axiom SSDEV20LC240-AX enterprise SSD 240 GB 3.5" SATA 600
240 GB enterprise SSD with 520 MB/s read and 245 MB/s write over SATA 600 in a hot-swappable 3.5" form factor
- 240 GB capacity supports enterprise workloads
- 520 MB/s read speed accelerates data access
- 245 MB/s write speed handles intensive writes
- Hot-swap 3.5" design enables drive changes without downtime
- SATA 600 interface integrates with existing server infrastructure
Capacity and interface
The Axiom SSDEV20LC240-AX is a 240 GB enterprise solid-state drive with a 3.5 inch form factor. It connects through a SATA 600 interface and supports hot-swap installation in compatible drive bays. Sequential reads reach 520 MB/s while sequential writes reach 245 MB/s.
Suited for read-heavy servers.
This drive fits servers that need reliable, hot-swappable storage for boot volumes, logging or read-oriented workloads. The 245 MB/s write ceiling makes it a poor match for databases, video ingest or other sustained write-heavy applications. Buyers who need higher write throughput or larger capacities should look at alternative enterprise models.
Check bay, backplane and controller compatibility
Verify that your chassis accepts 3.5 inch hot-swap trays and that the backplane carries SATA 6 Gb/s signals to each slot. Confirm the RAID or HBA controller supports SATA SSDs and can present the drive to the operating system without proprietary firmware locks. Ensure the operating system includes drivers for SATA 600 devices.
Fordele
- 240 GB capacity supports enterprise workloads
- 520 MB/s read speed accelerates data access
- 245 MB/s write speed handles intensive writes
- Hot-swap 3.5" design enables drive changes without downtime
- SATA 600 interface integrates with existing server infrastructure
Specifikationer
Der er endnu ikke offentliggjort specifikationer for denne vare.
Spørgsmål om denne vare
What server bay size is required to install this 3.5" SATA 600 enterprise SSD?
The drive fits a standard 3.5-inch hot-swap bay and connects through a SATA 600 interface, so the server must provide that bay size and a matching SATA backplane or cable.
Will this SATA 600 drive operate correctly if my backplane only supports the older SATA 3 Gb/s standard?
Yes, the SATA 600 interface is backward compatible and will negotiate the slower link speed automatically, although maximum read and write rates of 520 MB/s and 245 MB/s will be limited by the older bus.
How can I confirm the SSD is delivering its rated 520 MB/s read and 245 MB/s write performance after installation?
Run a sequential benchmark such as CrystalDiskMark or fio against the raw block device and compare the measured throughput to the 520 MB/s read and 245 MB/s write specifications.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
