Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black 120mm case fan with 15 blades and sleeved cables

BGears

BGears BG01794 b-Shark 120mm case fan 1500 RPM 82.6 CFM 26.5 dBA 3-pin

SKU CH-2HDE-0J9AW MPN BG01794

A 120mm case fan with 15 blades delivers 82.6 CFM airflow at 26.5 dBA using a fluid dynamic bearing

  • Fan Counts1 Fan
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeFluid Dynamic
  • RPM1500RPM±10%
  • 15-blade design moves 82.6 CFM for strong case cooling
  • Fluid dynamic bearing extends lifespan and reduces vibration
  • Low 26.5 dBA noise at full 1500 RPM speed
  • 3-pin connector fits standard motherboard headers
  • Sleeve-wrapped cables keep internal routing tidy

What the b-Shark 120mm fan delivers

The BGears BG01794 is a single 120mm case fan built for chassis intake or exhaust. Its 15-blade impeller and fluid dynamic bearing target high airflow at a rated 26.5 dBA, suiting builders who want stronger cooling without a loud system.

Practical limits of the 3-pin interface

The 3-pin power connector allows voltage-based speed control but lacks the fourth wire required for PWM regulation. Motherboards that only support 4-pin headers will run the fan at full 1500 RPM unless voltage control is available in BIOS or via a hardware controller.

Deciding spec: 82.6 CFM at 1500 RPM

This airflow figure determines whether the fan moves enough air for your thermal load. If the chassis or radiator needs more than 82.6 CFM, a higher-RPM or larger-diameter model is required; if the noise budget is tighter than 26.5 dBA, a slower fan should be chosen.

Fordele

  • 15-blade design moves 82.6 CFM for strong case cooling
  • Fluid dynamic bearing extends lifespan and reduces vibration
  • Low 26.5 dBA noise at full 1500 RPM speed
  • 3-pin connector fits standard motherboard headers
  • Sleeve-wrapped cables keep internal routing tidy

Specifikationer

Brandb-Shark
Fan Counts1 Fan
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeFluid Dynamic
RPM1500RPM±10%
Air Flow82.6 CFM
Noise Level26.5dBA
Power Connector3 Pin
ColorBlack
Forsendelsesvægt0.12 kg
Pakkestørrelse203 × 152 × 51 mm

Spørgsmål om denne vare

How do I decide between the 120mm 25mm thick model and a thinner fan?

The 25mm thickness fits standard 120mm mounts; choose it when your case or radiator has the full depth available.

What does the 82.6 CFM rating mean once the fan is installed?

At 1500 RPM it moves 82.6 CFM of air, delivering strong case or radiator airflow while the fluid dynamic bearing keeps noise to 26.5 dBA.

What does the 3-pin connector limit in practice?

The 3-pin connector provides voltage control only, so speed varies with motherboard voltage regulation rather than PWM duty cycles.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.